LabAdviser/Courses/TPT Thin Film: Difference between revisions

Latest revision as of 20:54, 24 February 2025

The contents on this page, including all images and pictures, was created by DTU Nanolab staff unless otherwise stated.

Feedback to this page: click here

Thin Film Tool Package Training

DTU Nanolab offers a Tool Package Training for Thin Film Techniques (TPT Thin Film). You are required to pass this course, in order to get access to thin film equipment inside the DTU Nanolabs cleanroom facility. The course includes theory on thin film growth and deposition processes. The theory part consists of lecture videos followed by quizzes for each section. Once completed successfully, you can request hands-on training for the equipment inside the cleanroom via training@nanolab.dtu.dk.

The course is available via DTU Learn. You sign up for the course by enrolling yourself in the course here.

Course Layout

Online lecture videos (theory)
Quizzes for each section
Individual hands-on training (specific equipment)

Individual ands on training can be requested via training@nanolab.dtu.dk.

Learning objectives

Understand different film deposition methods
Learn different thin film formation mechanisms
be aware of relevant materials properties
compare and be able to understand appropriate thin film techniques
introduction to equipment at DTU Nanolab

Course Contents

Introduction to Thin Film Techniques
- Thin Film Formation
- Material Properties
- Overview over Thin Film Techniques
Physical Vapour Deposition (PVD)
- Introduction to PVD
- Resistive thermal evaporation
- E-beam Evaporation
- Sputtering
Thermal Oxidation
Chemical Vapor Deposition (CVD)
Atomic Layer Deposition (ALD)

Qualifying Prerequisites

Cleanroom safety course at DTU Nanolab
Admission to the cleanroom must be obtained before the group training session

Course Responsible

Pernille Voss Larsen
Evgeniy Shkondin

If you have questions you can contact us via thinfilm@nanolab.dtu.dk.

Knowledge and Information about Thin Film Techniques

Introduction to Thin Films

Thermal oxidation

S. Franssila, (2010), Introduction to Microfabrication, Chapter 13: Thermal Oxidation

@@ Line 1: / Line 1: @@
-'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/Courses/TPT_Thin_Film click here]'''
+''The contents on this page, including all images and pictures, was created by DTU Nanolab staff unless otherwise stated.''
-''This page is written by DTU Nanolab internal''
+'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/Courses/TPT_Thin_Film click here]'''
-==Thin Film TPT ==
+== Thin Film Tool Package Training ==
-DTU Nanolab offers a Tool Package Training (TPT) course in thin film growth and deposition techniques.
+DTU Nanolab offers a Tool Package Training for Thin Film Techniques (TPT Thin Film). You are required to pass this course, in order to get access to thin film equipment inside the DTU Nanolabs cleanroom facility. The course includes theory on thin film growth and deposition processes. The theory part consists of lecture videos followed by quizzes for each section. Once completed successfully, you can request hands-on training for the equipment inside the cleanroom via [mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk].
+<BR>
-Users that have to use any thin film growth and/or deposition tools in the cleanroom will have to sign up for the lectures, before they apply for a training (i.e. it is possible to get a training and then attend the lectures afterwards).
+<BR>
+The course is available via DTU Learn. You sign up for the course by enrolling yourself in the course [https://www.nanolab.dtu.dk/access/cleanroom-access/equipment-training/thin-film-training here].
-{|border="1" cellspacing="0" cellpadding="3" align="left" style="text-align:left;" style="width: 70%;"
+<BR>
-|-
+<BR>
+'''Course Layout'''
-|-
+# Online lecture videos (theory)
-|-style="background:White; color:black; text-align:center"
+# Quizzes for each section
-!colspan="2"|Thin film tool package training (TPT)
+# Individual hands-on training (specific equipment)
-|-
+<BR>
+''Individual ands on training can be requested via [mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk].''
-|-
+<BR>
-!Schedule
+<BR>
-|
+'''Learning objectives'''
-===<b>Theoretical part</b>===
+<BR>
+* Understand different film deposition methods
+* Learn different thin film formation mechanisms
-'''1<sup>st</sup> lecture (2 - 2½ hours):'''
+* be aware of relevant materials properties
-*Introduction to thin films
+* compare and be able to understand appropriate thin film techniques
-*Before you start - Material properties to consider
+* introduction to equipment at DTU Nanolab
-*Overview of thin film techniques at DTU Nanolab
+<BR>
-*Equipment overview in LabAdviser
+'''Course Contents'''
-*Thin film techniques – 1<sup>st</sup> part:
+<BR>
-**Thermal oxidation
+* Introduction to Thin Film Techniques
+** ''Thin Film Formation''
-<i>Sign up for the next lecture here: https://nanolab.doodle.com/poll/k4pdm2n4bpseww5e.
+** ''Material Properties''
+** ''Overview over Thin Film Techniques''
-The next lecture will be held on the 10th of January 2024 from 10-12. The lecture will be held in building 358 room 039.
+* Physical Vapour Deposition (PVD)
+** ''Introduction to PVD''
-Please note that the Thin Film TPT course is mandatory for all new users that need to use thin film tools in the cleanroom, but it is possible to apply for a training before you attend the lecture, if you send an email to training@nanolab.dtu.dk.</i>
+** ''Resistive thermal evaporation''
+** ''E-beam Evaporation''
-<!--If you cannot wait until September to join the lecture, then send an email to thinfilm@nanolab.dtu.dk.-->
+** ''Sputtering''
+* Thermal Oxidation
-<!-- If you cannot wait until September to join the lecture, then send an email to thinfilm@nanolab.dtu.dk. There is a chance that we can arrange a lecture in August, if more people wants to attend this, or that we can make a video of the lecture.-->
+* Chemical Vapor Deposition (CVD)
+* Atomic Layer Deposition (ALD)
-'''2<sup>nd</sup> lecture (3 - 3½ hours):'''
+<BR>
-*Thin film techniques – 2<sup>nd</sup>  part:
+'''Qualifying Prerequisites'''
-**PVD (physical vapour deposition)
+<BR>
-***E-beam evaporation
+* Cleanroom safety course at DTU Nanolab
-***Thermal evaporation
+* Admission to the cleanroom must be obtained before the group training session
-***Sputtering
+<BR>
-**CVD (chemical vapour depostion)
+'''Course Responsible'''
-***LPCVD (low pressure chemical vapour deposition)
+* Pernille Voss Larsen
-***PECVD (plasma enhanced chemical vapour deposition)
+* Evgeniy Shkondin
-**ALD (atomic layer deposition)
+<BR>
+If you have questions you can contact us via [mailto:thinfilm@nanolab.dtu.dk thinfilm@nanolab.dtu.dk].
-<i>Sign up for the next lecture here: https://nanolab.doodle.com/poll/4r3ydwzzbrdepgpf
-The next lecture will be held on the 15th of January 2024 from 9-12. The lecture will be held in building 358 room 039.
-Please note that the Thin Film TPT course is mandatory for all new users that need to use thin film tools in the cleanroom, but it is possible to apply for a training before you attend the lecture, if you send an email to training@nanolab.dtu.dk.
-<!-- Please note that it is possible to apply for a training before you attend the lecture, if you send an email to training@nanolab.dtu.dk.</i>
-If you cannot wait until September to join the lecture, then send an email to thinfilm@nanolab.dtu.dk. There is a chance that we can arrange a lecture in August, if more people wants to attend this, or that we can make a video of the lecture.-->
-===<b>Practical part</b>===
-* None
-|-
-|-
-!Location
-|
-'''Theoretical part'''
-The locations for the lectures will be notified in the Doodles
-|-
-|-
-!Qualified prerequisites
-|
-None
-|-
-|-
-!Preparations
-|
-No preparation is required.
-However, a good overview of thin film processes can be found in [http://onlinelibrary.wiley.com/doi/10.1002/9781119990413.ch5/pdf Sami Franssila "Introduction to Microfabrication" (2010), Chapter 5: Thin-Film Materials and Processes] (requires login).
-Links to more literature about thin films can be found below.
-|-
-|-
-!Course responsible
-|
-The Thin Film group at DTU Nanolab (thinfilm@nanolab.dtu.dk)
-|-
-|-
-!Learning goals
-|
-*Be aware of relevant material properties for thin films made in the cleanroom
-*Understand different thin film techniques
-*Compare and be able to select appropriate thin film technique
-|-
-|}
 <br clear="all" />
+<BR>
-==Presentations from the lectures==
+==Knowledge and Information about Thin Film Techniques==
-<big>Slides from the 1<sup>st</sup> lecture</big>
-*[https://labmanager.dtu.dk/function.php?module=MiscDocument&view=docs&page_id=387f  See LabManager (requires a login)]
-<!--[[Media:1_DTU_Nanolab_Thin_Film_TPT_final_April_2023.pptx]]-->
-<big>Slides from the 2<sup>nd</sup> lecture</big>
-*[https://labmanager.dtu.dk/function.php?module=MiscDocument&view=docs&page_id=387f  See LabManager (requires a login)]. <i>Notice that the presentation is divided into two parts</i>
-<!--[[Media:2_DTU_Nanolab_Thin_Film_TPT_final_May2023.pptx]]-->
-==Literature==
-Some literature about thin films can be found here (requires a login):
-====Introduction to thin films====
+====Introduction to Thin Films====
 *[http://onlinelibrary.wiley.com/doi/10.1002/9781119990413.ch5/pdf  S. Franssila, (2010), Introduction to Microfabrication, Chapter 5: Thin-Film Materials and Processes]
 *[http://onlinelibrary.wiley.com/doi/10.1002/9781119990413.ch7/pdf  S. Franssila, (2010), Introduction to Microfabrication, Chapter 7: Advanced Thin Films]
@@ Line 131: / Line 66: @@
 *[http://onlinelibrary.wiley.com/doi/10.1002/9781119990413.ch13/pdf  S. Franssila, (2010), Introduction to Microfabrication, Chapter 13: Thermal Oxidation]
-====Stress in thin films====
+====Stress in Thin Films====
 *[https://avs.scitation.org/doi/10.1116/1.5011790 Journal of Vacuum Science & Technology A 36, 020801 (2018) Review Article: Stress in thin films and coatings: Current status, challenges, and prospects]
-*[https://www.bruker.com/fileadmin/user_upload/8-PDF-Docs/SurfaceAnalysis/StylusProfilometry/ApplicationNotes/AN516-Thin_Film_Stress_Measurement_Using_Dektak_Stylus_P.pdf Dektak stress measurements]
+*[https://www.bruker.com/en/meta/fileadmin/_jcr_content/root/contentpar/search.download-asset.pdf/2bbdadb5-98f9-4b72-9ad4-cfb3683fb2da/thin-film-stress-measurement-using-dektak-stylus-profilers-app-note-BRUKER.pdf Dektak stress measurements]
+<br clear="all" />
+<BR>