Specific Process Knowledge/Lithography/EBeamLithography/AR-P 617: Difference between revisions
| (One intermediate revision by the same user not shown) | |||
| Line 28: | Line 28: | ||
*Substrate: 2" Si | *Substrate: 2" Si | ||
*Acceleration: 1000 RPM/s | *Acceleration: 1000 RPM/s | ||
*Speed: 4000 RPM | |||
*Time: 60 s | *Time: 60 s | ||
*Baking temperature: 200C, 180C and 160C | *Baking temperature: 200C, 180C and 160C | ||
| Line 46: | Line 47: | ||
=Development= | =Development= | ||
AR-P is developed in AR 600-50 and IPA is used to rinse and stop development. As we have no dedicated setup for this it must be done in beakers in the EBL development fumehood in E4. | AR-P 617 is developed in AR 600-50 and IPA is used to rinse and stop development. As we have no dedicated setup for this it must be done in beakers in the EBL development fumehood in E4. | ||
Typical development time is 60-90 seconds and it is recommended to rinse for 30 seconds in IPA. | Typical development time is 60-90 seconds and it is recommended to rinse for 30 seconds in IPA. | ||