Specific Process Knowledge/Lithography/ARN8200: Difference between revisions
No edit summary |
|||
| (18 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== AR-N 8200 == | == AR-N 8200 == | ||
AR-N 8200 is a negative E-beam resist from Allresist, it is also known as "Medusa 82". | AR-N 8200 is a negative E-beam resist from Allresist, it is also known as "Medusa 82". A product presentation from Allresist is available here [https://www.allresist.com/wp-content/uploads/sites/2/2020/10/Medusa82_presentation-2020.pdf AR-N8200 presentation.] | ||
[[ | Allresist also provides these [https://www.allresist.com/wp-content/uploads/sites/2/2020/03/SXAR-N8200-1_english_Allresist_product_information.pdf processing guidelines.] | ||
== Contrast curve @ 100 kV (JEOL 9500) == | |||
Exposure dose for AR-N 8200 is very dependent on Post Exposure Bake (PEB) temperature. A contrast curve for four different PEB processes were obtained with the following process parameters. | |||
{|border="1" cellspacing="0" cellpadding="3" style="text-align:left;" style="width: 95%" | |||
|- | |||
|- | |||
|-style="background:Black; color:White" | |||
!colspan="5"|AR-N 8200 Contrast Curve, Processed by THOPE, FEB 2022 | |||
|- | |||
|- | |||
|-style="background:WhiteSmoke; color:black" | |||
!Resist | |||
!Spin Coat | |||
!E-beam exposure | |||
!PEB | |||
!Development | |||
|- | |||
|- | |||
|-style="background:WhiteSmoke; color:black" | |||
|AR-N8200.06 | |||
|LabSpin 2, 4000 rpm for 60s, softbake 10 min @ 150 degC, thickness is 110 nm | |||
|JBX9500, 60 nA, doses 100-1600 µC/cm2, 150 µm x 300 µm rectangles | |||
|Labspin 2 hotplate, 130, 150, 160 or 170 degC for 10 min | |||
|EBL development fumehood, 60 sec development in AR300-47:DIW (1:1), 30 sec rinse in DIW, nitrogen gun dry | |||
|- | |||
|} | |||
Hotplate temperatures are assumed surface temperatures based on the 0.90 correction factor in use on the hotplate. | |||
The resulting resist structure height is mapped with Dektak XTa and plotted as a contrast curve below. It is apparent that the dose and contrast is very dependent on the PEB parameters. | |||
[[file:ARN8200DoseCurve.png]] | |||
== Results at 30 kV (Raith eLINE) == | |||
A dose test is carried out with the following parameters | |||
{|border="1" cellspacing="0" cellpadding="3" style="text-align:left;" style="width: 95%" | |||
|- | |||
|- | |||
|-style="background:Black; color:White" | |||
!colspan="5"|AR-N 8200 30 kV dose test, Processed by THOPE, AUG 2022 | |||
|- | |||
|- | |||
|-style="background:WhiteSmoke; color:black" | |||
!Resist | |||
!Spin Coat | |||
!E-beam exposure | |||
!PEB | |||
!Development | |||
|- | |||
|- | |||
|-style="background:WhiteSmoke; color:black" | |||
|AR-N8200.06 | |||
|LabSpin 2, 4000 rpm for 60s, softbake 10 min @ 150 degC, thickness is 120 nm | |||
|Raith eLINE Plus, 30 kV, 60 µm aperture, 168 pA | |||
|Labspin 2 hotplate 170 degC for 10 min | |||
|EBL development fumehood, 60 sec development in AR300-47:DIW (1:1), 30 sec rinse in DIW, nitrogen gun dry | |||
|- | |||
|} | |||
Area/curved element dose: Fully insoluble dose is around 150-180 µC/cm2. | |||
Line dose: Fully insoluble dose is around 1700 pC/cm. | |||
Dot dose: Fully insoluble dose is around 0.1 pC, this gives a circular diameter of 60 nm. Diameter can be varied by increasing dose, at 0.4 pC diameter is about 100 nm and at 1.2 pC it is about 170 nm. | |||
Latest revision as of 11:42, 8 August 2022
AR-N 8200
AR-N 8200 is a negative E-beam resist from Allresist, it is also known as "Medusa 82". A product presentation from Allresist is available here AR-N8200 presentation.
Allresist also provides these processing guidelines.
Contrast curve @ 100 kV (JEOL 9500)
Exposure dose for AR-N 8200 is very dependent on Post Exposure Bake (PEB) temperature. A contrast curve for four different PEB processes were obtained with the following process parameters.
| AR-N 8200 Contrast Curve, Processed by THOPE, FEB 2022 | ||||
|---|---|---|---|---|
| Resist | Spin Coat | E-beam exposure | PEB | Development |
| AR-N8200.06 | LabSpin 2, 4000 rpm for 60s, softbake 10 min @ 150 degC, thickness is 110 nm | JBX9500, 60 nA, doses 100-1600 µC/cm2, 150 µm x 300 µm rectangles | Labspin 2 hotplate, 130, 150, 160 or 170 degC for 10 min | EBL development fumehood, 60 sec development in AR300-47:DIW (1:1), 30 sec rinse in DIW, nitrogen gun dry |
Hotplate temperatures are assumed surface temperatures based on the 0.90 correction factor in use on the hotplate.
The resulting resist structure height is mapped with Dektak XTa and plotted as a contrast curve below. It is apparent that the dose and contrast is very dependent on the PEB parameters.
Results at 30 kV (Raith eLINE)
A dose test is carried out with the following parameters
| AR-N 8200 30 kV dose test, Processed by THOPE, AUG 2022 | ||||
|---|---|---|---|---|
| Resist | Spin Coat | E-beam exposure | PEB | Development |
| AR-N8200.06 | LabSpin 2, 4000 rpm for 60s, softbake 10 min @ 150 degC, thickness is 120 nm | Raith eLINE Plus, 30 kV, 60 µm aperture, 168 pA | Labspin 2 hotplate 170 degC for 10 min | EBL development fumehood, 60 sec development in AR300-47:DIW (1:1), 30 sec rinse in DIW, nitrogen gun dry |
Area/curved element dose: Fully insoluble dose is around 150-180 µC/cm2.
Line dose: Fully insoluble dose is around 1700 pC/cm.
Dot dose: Fully insoluble dose is around 0.1 pC, this gives a circular diameter of 60 nm. Diameter can be varied by increasing dose, at 0.4 pC diameter is about 100 nm and at 1.2 pC it is about 170 nm.