View source for LabAdviser/LabManager/Guide - select the proper laboratories

==Guide - select the proper laboratories==

LabManager contains +200 active equipment. That is a lot of equipment to scroll through when you need to find it in the system. Therefore the equipment is grouped into the laboratories, they are located in and which you have access to.

To see equipment from a lab you must select it - go to the header ribbon of LabManager and click the button "Change". 

[[File:labs1.png|900px]]

Afler clicking "Change" your personal profile page is displayed. The labs you are authorized for will appear in green, but you can select all laboratories at DTU Nanolabto if you wish. And you can deselect at anytime - if there is too much information.

[[File:labs3.png|900px]]

Click "Save" after the labs have been clicked. If no labs are selected - those you are authorized for will be selected. The lab "Open Access Non-CR 346" comprises the two labs in the basement of 346 (laser and XPS) and the open access labs on the first floor of 346 (dicer etc.)

Your selection of labs does not  affect the "List" with equipment as it contains all DTU Nanolab equipment. Your list of orderlines are also not affected - you can always see all of your orderlines.