View source for LabAdviser/314/Microscopy 314-307/TEM/Tips/GIF-apertures

'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/314/Microscopy_314-307/TEM/Tips/GIF-apertures click here]'''

(''content by Jens Kling, March 2020'')
[[Category:314]]
[[Category:314-Microscopy]]


= GIF apertures are not responding =



From time to time, there might be some issues with the GIF apertures not responding and moving. If this is the case, try the following:

#Close the software "Filter Control" and "DM" on the microscope PC.
#Go to the cabinet back of the microscope, where the controlers for the CCD cameras and GIF are (see image).
#Switch off the main power supply at the bottom (GIF electronics; right above the OneView controler).
#Wait 10s
#Switch the power back on.
#Make sure the two CCD controlers don't show an error (orange LED above RESET); if they do, press "Reset").
#Start "Filter Control" and "DM" on the microscope PC.


[[File:GIF-apertures.png|300px|left|thumb|Rack behind the microscope PC]]
<br clear="all" />