View source for LabAdviser/Introduction to LabManager

'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/LabAdviser/Introduction_to_LabManager click here]'''

=== Booking in LM ===

Find the Lab Manager booking rules here: [http://labmanager.dtu.dk/d4Show.php?id=3097| Booking rules]

=== Logbooks in LM ===

Presentation on how to use the Process Logbooks in LM: [[Media:Howto - Process logbooks in LM.pdf| Howto - Process logbooks in LM]]

=== Equipment Cross Contamination [[Image:section under construction.jpg|70px]] ===

Presentation on how to use Cross Contamination in LM: [[Media:140828 Cross contamination Public.pdf|Howto - Cross Contamination in LM]]

=== Equipment with LabManager Lock ===

Some equipment is equipped with a "LabManager Lock". This is an electronic switch that allows use of the tool only if you are logged in on LabManager. It looks like this: [[File:Example.jpg]]
*RED means: No-one is logged in. You are not able to use the equipment. Some feature on the tool is disabled so that you cannot use it. What is disabled differs from equipment to equipment. It can be the monitor that does not turn on, the furnace will not load or the shutter not turn on. 
*YELLOW means: The equipment is under service. You are ''under no circumstances allowed'' to use the equipment. 
*GREEN means: Someone is logged in. You are able to use the equipment, but make sure it is you that is logged in. 

=== Orderlines in LM ===

When you use the cleanroom, use equipment or buy wafers your project or department will be charged according to the DTU Danchip pricebook. You can review the charges if you click the "Orderlines" in the LabManager main menu. Note for the cost indicated is the cost for commercial activities. The actual cost charged depends on what kind of project your are working on. See the DTU Danchip pricebook for details.
You have the possibility to correct the orderline e.g. if it is charged on the wrong project or you had forgot to log out of a tool. Click on the [Change] field to the right of the line. A new line opens where you can edit the amount, project, text or date. If you edit the amount the change has to be acknowledged by Danchip first.

=== Purchase of wafers ===

You need to purchase the wafers that you use in the cleanroom. This is also done in LabManager. 

Click on the [&equiv;] to the top left on the page to bring out the full LabManager menu. Find the Shop sub-menu and select Wafers.

A list with wafers available for purchase opens. 
* Find the type of wafer you want. 
* Make sure all specifications are as wished.
* Check the stock and
* any comments
* Click the [Buy] button if everthing is OK and
* fill the out the form.

=== Data transfer from equipment ===

How to transfer data from some equipment in the clean room: 
[http://labmanager.dtu.dk/d4Show.php?id=3514| Manual for remote.dtu.dk]

=== General info ===

You can find important information about the clean room in LabManager here: [http://labmanager.dtu.dk/function.php?module=Machine&view=generalinfo&page_id=64| Documents with General Information]

As of December 2014 it contains:

 Safety Documents
   Approved Chemicals
   Temporarily Approved Chemicals
   Procedure for sikkerhedsgodkendelse af nyt og flyttet udstyr (SI 3.0.1.1)
   Beredskabsplanen (SI 3.2.1)
   Alarmsystemet (SI 3.2.3)
   Ansvarlige (SI 3.2.4)
   Procedure for approval of new chemical (SI 3.3.6)
   Safety policy on Danchip (SI 3.4.2)
   Generelle regler for arbejde i renrum (SI 3.5.1)
   Rules for working in the cleanroom (SI 3.5.1)
   Regler for arbejde med kemi på Danchip (SI 3.5.2)
   Rules for working with Chemistry in the Cleanroom (SI 3.5.2)

 Cleanroom Documents
   Booking Rules
   Cross Contamination
   Cleanroom Map
   Manual for remote.dtu.dk (data transfer)