LabAdviser/LabManager/Front Page

Front Page

Equipment Being Used

This part shows equipment currently in use. Users own bookings are located at the top of the "Equipment Being Used"-list while equipment used by other users is listed in alphabetical order. You can directly access the process log as well as stop equipment usage - immediately ("Stop Now") or with a specified time delay ("Delayed Stop)".

My Bookings Today

Equipment usage can be started in different ways. One possibility is via the Frontpage under "My Bookings Today" by selecting "Go to Start". A new tab will open below with an overview of important status change information that should be checked before starting to use the equipment. There is also a direct link to the weekly calendar of the respective equipment.

Equipment in 'Service'/'Limited Use'/'Out of use' or Bypassed

In this part equipment is listed that is currently in limited use, out-of use, or being serviced. Beside the status a short description of why the tool is not fully functional a date for expected return to full functionality is stated (if possible). A tool in limited use is still accesible for use, but with some limitation, f.ex. a certain gas or process not being available or QC being out of specifications.

Please be aware that the expected date is often a best guess estimate. Delay in part delivery and limited man power might cause more delay. Please also understand that sometimes a small valve problem requires to take apart the entire machine with plenty of small pieces and partially custom-made parts that may not be easily replaceable.