Jump to content

LabAdviser/Technology Research/Direct write lithography on MLAs for fabrication of carbon micro tips

From LabAdviser
< LabAdviser | Technology Research
Revision as of 16:56, 27 May 2025 by Mmat (talk | contribs) (→Carbon Based Microsensors)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Feedback to this page: click here

Carbon Based Microsensors

  • Project type: Ph.D thesis
  • Project responsible: Long Quang Nguyen
  • Supervisors: Stephan Sylvest Keller
  • Partners involved: Leo Foundation and Gentoffe Hospital
  • Project start: 2019-01-01
  • DTU Orbit: Carbon Based Microsensors

Project description

This project is a part of InstaPatch project that belong to Associate Professor Stephan Sylvest Keller. In this part, the fabrication process for pyrolytic carbon microneedles will be developed by direct write lithography technique. The final microneedle structure will have a sharp tip with atleast 400um in height. After fabrication, the microneedle will be characterized in penetration properties and be ready to be used as electrochemical sensor for histamine sensing.

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=LabAdviser/Technology_Research/Direct_write_lithography_on_MLAs_for_fabrication_of_carbon_micro_tips&oldid=52558"