Specific Process Knowledge/Thin film deposition/Deposition of TiW/Sputtering of TiW in Wordentec/Grain size and uniformity of TiW layers: Difference between revisions

Revision as of 17:11, 11 September 2022

Feedback to this page: click here

Grains and uniformity of a sputtered TiW film

TiW films were deposited by sputtering in the Wordentec. AFM pictures show how the surface roughness is dependent on the process parameters.

For the sputter process, the power and argon pressure can be set to different values. Depending on the process parameters, the deposited layers will have different characteristics: the roughness, grain size and uniformity may be different.

Power: 150 W, pressure: 1*10^-3 mbar

With use of the settings 150W and 1*10^-3 mbar, a surface with low roughness is deposited.

Measurement done September 2008, KNIL.

Revision as of 11:38, 19 March 2020 view source Reet (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231 1,736 edits →Grains in a sputtered TiW film ← Older edit		Revision as of 17:11, 11 September 2022 view source Eves (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers 4,346 edits No edit summary Newer edit →
Line 8:		Line 8:


	'''Power 150 W, pressure 1*10<sup>-3</sup> mbar'''		'''Power: 150 W, pressure: 1*10<sup>-3</sup> mbar'''

	With use of the settings 150W and 1*10<sup>-3</sup> mbar, a surface with low roughness is deposited.		With use of the settings 150W and 1*10<sup>-3</sup> mbar, a surface with low roughness is deposited.