Specific Process Knowledge/Thermal Process/Oxidation/Oxidation on III-V oxidation furnace (C2)

From LabAdviser
Jump to navigation Jump to search

THIS PAGE IS UNDER CONSTRUCTION

Unless otherwise stated, this page is written by DTU Nanolab internal

The furnace is being tested.

Flow440 recipe

Standby: N2 purge at 3 SLM and Standby temperature at 440C

LM-LOCK: Check LabManager

Wet stabilize: N2 through bubbler at 1.5 SLM for 20 min and then wait for operator to open the furnace

Open

Load samples

Close

Wet oxidation: Time: variable

Open: Automatically opens after the oxidation time reaches

Unload samples

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thermal_Process/Oxidation/Oxidation_on_III-V_oxidation_furnace_(C2)&oldid=46212"