Specific Process Knowledge/Back-end processing/Die Bonder: Difference between revisions

From LabAdviser
Jump to navigation Jump to search
No edit summary
mNo edit summary
Line 1: Line 1:
'''Feedback to this page''': '''[mailto:danchipsupport@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://http://labadviser.danchip.dtu.dk/index.php?title=Specific_Process_Knowledge/Back-end_processing/Die_Bonder click here]'''
'''Feedback to this page''': '''[mailto:danchipsupport@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php?title=Specific_Process_Knowledge/Back-end_processing/Die_Bonder click here]'''
<!-- Replace "http://labadviser.danchip.dtu.dk/..." wih the link to the Labadviser page-->
<!-- Replace "http://labadviser.danchip.dtu.dk/..." wih the link to the Labadviser page-->


Revision as of 11:41, 5 September 2013

Feedback to this page: click here

Die bonder (eutectic metal soldering)

The Cammax EDB80 Die bonder is for placing and soldering dies onto a package or substrate.

The user manual(s), quality control procedure(s) and results, user APV(s), technical information and contact information can be found in LabManager:

The Die-bonder Cammax EDB-80

Die Bonder in LabManager

Process information

Flip-chip bonder (glue attachment)

File:Flip-chip-bonder.jpg
The Flip-chip bonder (picture coming soon)

Flip-chip Bonder in LabManager (not there yet)

Equipment performance and process related parameters

Equipment Die bonder Flip-chip bonder
Purpose
  • Fine placement of dies
  • Eutectic metal soldering
  • Fine placement of dies
  • glue attachment
Performance
  • Low thermal resistance
  • Always conducting
  • Medium or High thermal resistance
  • Possibility of both conducting and isolating adhesives
  • If an epoxy based adhesive is used the user is required to have the epoxy course.
Substrates Allowed materials
  • Should be able to withstand the soldering temperature
  • Typical materials are: Alumina (Al2O3), AluminumNitride (AlN)
  • Any that is compatible with the glue used


Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Back-end_processing/Die_Bonder&oldid=10981"