LabAdviser/314/Microscopy 314-307/SEM/AFEG
(Redirected from LabAdviser/314/SEM/AFEG)
Feedback to this page: click here
This section is written by DTU Nanolab internal if nothing else is stated.
AFEG 250 Analytical ESEM (FEI Quanta FEG 250)
The AFEG is an FEI Quanta FEG 250(Field Emission Gun) scanning electron microscope with a spatial resolution of 2 nm for the ETD detector in high vacuum at 30 keV. The microscope can operate in high vacuum and low vacuum modes at room temperature. Our AFEG is fitted with EDS and WDS detectors, which allows for analytical measurements in all the operation modes.
Process information
- Electron source
- Field emission gun
- Accelerating voltage
- 500 V- 30 kV
- Resolution
- 2 nm at 30 kV (SE)
- Imaging detectors
- Everhart-Thornley (SE/BSE)
- Solid State BSE
- Large Field (LVD)
- Gaseous SE (GSED)
- Gaseous BSE
- Gaseous Analytical (GAD)
- STEM
- vCD
- Imaging modes
High and low vacuum
- Analytical capabilities
- Energy dispersive X-rays (Oxford Instruments 50 mm2 X-Max silicon drift detector, MnKα resolution at 124 eV)
- Wavelength Dispersive Spectrosopy
Equipment | AFEG FEI Quanta FEG 250 | |
---|---|---|
Purpose | Vizualization and Microanalysis |
|
Performance | Resolution | The resolution of AFEG depends on the sample and the operation mode! |
| ||
Instrument specifics | Detectors |
|
Electron source |
| |
Stage (room temperature) |
| |
WDS |
| |
EDS |
| |
Operating pressures |
| |
Samples | Sample sizes |
|
Allowed materials |
|