Specific Process Knowledge/Thermal Process/A4 Phosphor Pre-dep furnace

Feedback to this page: click here

Phosphorus Pre-dep furnace (A4)

Phosphorus Pre-dep furnace (A4). Positioned in cleanroom 2

The Phosphorus Pre-dep furnace (A4) is used to dope Si wafers with phosphorus to make conductive structures, etch stop layers etc. The doping source is phosphoryl chloride (commonly called phosphorus oxychloride) which is a colourless liquid with the formula POCl₃.

A4 is the lowest furnace tube in the A-stack positioned in cleanroom 2. The furnaces in the A-stack are the cleanest of all furnaces in the cleanroom. Please be aware of that all wafers have to be RCA cleaned before they enter the furnace, and check the cross contamination information in LabManager before you use the furnace.

The user manual, technical information and contact information can be found in LabManager:

Phosphorus Predep furnace (A4)

Process knowledge

• Dope with Phosphorus

Overview of the performance of the Phosphoris Pre-dep furnace and some process related parameters

Purpose	Doping of Phosphor
Performance		Look at Process knowladge
Process parameter range	Process Temperature	900-1150 oC
	Process pressure	1 atm
	Gasses on the system	POCl3, N2
Substrates	Batch size	1-30 4" wafer (or 2" wafers) per run
	Substrate material allowed	Silicon wafers (RCA cleaned)