Specific Process Knowledge/Characterization/Probe station

From LabAdviser

Probe Station

Feedback to this page: click here

Probe station

Probe station. Positioned in serviceroom CX1

The purpose is to measure the thickness of wafers, depths of larger grooves or height of larger mesas.

During a KOH etch it can be helpful to ensure no over-etching by making a thickness measurement during the etching.

Equipment performance and process related parameters

Purpose

Thickness measurer

  • Wafer thickness
  • Depths of larger grooves
  • Heigth of larger mesas

Performance

Thickness resolution

  • < 5 µm

Substrates

Batch size

  • One sample
Substrate materials allowed
  • No restrictions


The Probe station is a - EPS150Triax - Cascade for I/V measurement, ohmic measurements etc, it has 4 individually adjustable probes, but can be fitted with more. It has several source meters, multi meters and a computer attached.

It can be used from pieces up to 6" wafers

File:Probestation.jpg
Probe station: positioned in Service room CX1

The user manual, technical information and contact information can be found in LabManager:

Probe station

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Probe_station&oldid=27238"