Specific Process Knowledge/Characterization
Feedback to this page: click here
Unless otherwise stated, this page is written by DTU Nanolab internal
Overview of characteristics and where to measure it
| Optical Micro- scopes | SEM (incl. EDX) | AFM | Stylus profiler | Optical profiler | Filmtek (reflec- tometer) | Ellip- someter | Thickness stylus | XPS | PL mapper | 4-point probe | Probe station | XRD | Life time scanner | Drop shape analyser | Hardness tester | Particle scanner | IR-camera | III-V ECV-profiler | Microspectrophotometer (Craic 20/30 PV) | |
| Breakdown voltage | ||||||||||||||||||||
| Carrier density/doping profile | x | |||||||||||||||||||
| Charge carrier life time | x | |||||||||||||||||||
| Contact angle hydrophobic/hydrophillic | x | |||||||||||||||||||
| Crystallinity | x | |||||||||||||||||||
| Deposition uniformity | x | x | x | |||||||||||||||||
| Dimensions(in plane) | x | x | (x) | (x) | x | x | ||||||||||||||
| Dimensions(height)/Topography | (x) | (x) | x | x | x | |||||||||||||||
| Electrical conductivity | x | |||||||||||||||||||
| Element analysis | x | x | x 4) | x 4) | ||||||||||||||||
| Film stress | x | x 7) | ||||||||||||||||||
| Imaging | x | x | x | x | x | |||||||||||||||
| Material Hardness | x | |||||||||||||||||||
| Band gap | x | x | x | |||||||||||||||||
| Particles | x | x | x | x | x | |||||||||||||||
| Phase changes | ||||||||||||||||||||
| Reflectivity | x | x | x 6) | x | ||||||||||||||||
| Refractive index | x | x | ||||||||||||||||||
| Resistivity | x | |||||||||||||||||||
| Step coverage | x 1) | x 1) | ||||||||||||||||||
| Surface roughness | x | x | x | x | ||||||||||||||||
| Thermal conductivity | ||||||||||||||||||||
| Thin film thickness | x 1) | x 1) | x 2) | x 2) | x | x | x | x 5) | x 3) | x | ||||||||||
| Voids in wafer bonding | x | x | x | |||||||||||||||||
| Wafer thickness | x 1) | x 1) | x | |||||||||||||||||
| Work function | x |
- Using the cross section method
- Using the create step method
- With known resistivity
- Composition information for crystalline materials
- Only single layer
- Good for characterization of VCSEL structures and DBR mirrors
- Only for crystalline films
Choose characterization topic
- Carrier density (doping) profiler
- Contact angle measurement
- Element analysis
- Film thickness and optical constants
- Hardness measurement
- Photoluminescence mapping
- Four-Point Probe (Resistivity measurement)
- Sample imaging
- Sample preparation for inspection
- Scanning Electron Microscopy
- Stress measurement
- Wafer thickness measurement
- Topographic measurement
- X-ray diffraction
Choose equipment
AFM
Electrical measurements
- 4-Point Probe
- Probe station
- III-V ECV-profiler (Electrochemical Capacitance-Voltage carrier density profiler)
Element analysis
Optical and stylus profilers
- Optical Profiler (Sensofar)
- Dektak XTA stylus profiler
- P17 stylus profiler from KLA-Tencor
- Dektak 3ST stylus profiler
- Stylus Profiler:Dektak150
Optical microscopes
Optical characterization
SEMs at DTU Nanolab - building 307/314
SEM's in building 346
TEMs at DTU Nanolab - building 307/314
XRD
- General page on XRD, page describing general info relevant to both our XRD's
- XRD Powder, tabletop XRD for Bregg-Brentano measurements of powders
- XRD SmartLab, advanced multipurpose instrument in the cleanroom
- XRD SmartLab 9kW Rotating Anode multipurpose system outside the cleanroom