Specific Process Knowledge/Etch/IBE⁄IBSD Ionfab 300/IBE blazed gratings: Difference between revisions

From LabAdviser
← Older editNewer edit →
VisualWikitext
Jmli (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,400 edits
No edit summary
Bghe (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, Bureaucrats, Administrators
7,007 edits
No edit summary
Line 6: Line 6:
<gallery caption="Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer "  widths="300px" heights="250px">
<gallery caption="Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer "  widths="300px" heights="250px">


Image:IBE 30min -Cr1.jpg |'''30min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:IBE 30 min -Cr1.jpg |'''30min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:after IBE 45min_A_34.jpg |'''45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:after IBE 45min_A_34.jpg |'''45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=400mA<br>*RF power=1300W<br>*I(B)=300mA<br>*V(B)=300V<br>*V(AC,B)=500V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=5sccm<br>*CHF3 flow=15sccm
Image:Edge_1.jpg|'''20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=550mA<br>*RF power=1300W<br>*I(B)=500mA<br>*V(B)=600V<br>*V(AC,B)=400V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=10sccm<br>*CHF3 flow=0sccm
Image:Edge_1.jpg|'''20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings''' <br>*Rotation speed 0 rpm<br>*Angle: -35<br>*I(N)=550mA<br>*RF power=1300W<br>*I(B)=500mA<br>*V(B)=600V<br>*V(AC,B)=400V<br>*Ar(N) flow=5sccm<br>*Ar(B) flow=10sccm<br>*CHF3 flow=0sccm

Revision as of 13:35, 6 September 2022

Feedback to this page: click here

  • 60nm Barc
  • 360nm KRF resist

by bge@nanolab experiments made in June/July 2012

  • Some examples of blazed gratings in fused silica etched with Cr and DUV resist as masking layer
  • 30min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    30min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
  • 45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    45min etch with 100nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
  • 20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings *Rotation speed 0 rpm *Angle: -35 *I(N)=550mA *RF power=1300W *I(B)=500mA *V(B)=600V *V(AC,B)=400V *Ar(N) flow=5sccm *Ar(B) flow=10sccm *CHF3 flow=0sccm
    20min etch with Krf resist, all resist is gone, used recipe BGHE blazed gratings
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=550mA
    *RF power=1300W
    *I(B)=500mA
    *V(B)=600V
    *V(AC,B)=400V
    *Ar(N) flow=5sccm
    *Ar(B) flow=10sccm
    *CHF3 flow=0sccm
  • 15+30min etch with 50nm Cr mask, used recipe BGHE blazed gratings with CHF3 *Rotation speed 0 rpm *Angle: -35 *I(N)=400mA *RF power=1300W *I(B)=300mA *V(B)=300V *V(AC,B)=500V *Ar(N) flow=5sccm *Ar(B) flow=5sccm *CHF3 flow=15sccm
    15+30min etch with 50nm Cr mask, used recipe BGHE blazed gratings with CHF3
    *Rotation speed 0 rpm
    *Angle: -35
    *I(N)=400mA
    *RF power=1300W
    *I(B)=300mA
    *V(B)=300V
    *V(AC,B)=500V
    *Ar(N) flow=5sccm
    *Ar(B) flow=5sccm
    *CHF3 flow=15sccm
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/IBE⁄IBSD_Ionfab_300/IBE_blazed_gratings&oldid=41224"