Specific Process Knowledge/Lithography/EBeamLithography/AR-P 617: Difference between revisions
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
{| style="border: none; border-spacing: 0; margin: 1em auto; text-align: center;" | {| style="border: none; border-spacing: 0; margin: 1em auto; text-align: center;" | ||
|- | |- | ||
| [[image: | | [[image:arp617spincurve.png|800px]] | ||
|- | |- | ||
| colspan="1" style="text-align: center;| | | colspan="1" style="text-align: center;| | ||
Revision as of 00:28, 28 January 2024
AR-P 617 is a positive PMMA based E-beam resist from Allresist. Process information provided by Allresist can be found here.
Spin coating
AR-P 617 can be spin coated on LabSpin 2 and 3 using the CSAR/PMMA bowlset. A spin curve for AR-P 617.06 is provided below. Process parameters are:
- Date: January 22nd 2024
- Coater: LabSpin 3
- Substrate: 2" Si
- Acceleration: 1000 RPM/s
- Time: 60 s
- Baking temperature: 200C (setpoint at 222C)
- Baking time: 120 s
|
|
AR-P 617.06 spin curve. |
Resulting resist thickness can be determined as y = axb, where y is thickness [nm], x is spin speed [RPM], a = 11664 and b = -0.442.