Specific Process Knowledge/Thin film deposition/Deposition of Nickel: Difference between revisions
No edit summary |
|||
| Line 9: | Line 9: | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Wordentec|Wordentec]]) | ! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Wordentec|Wordentec]]) | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Multisource PVD|PVD co-sputter/evaporation]]) | |||
|- | |- | ||
| Batch size | | Batch size | ||
| Line 18: | Line 19: | ||
*6x4" wafers or | *6x4" wafers or | ||
*6x6" wafers | *6x6" wafers | ||
| | |||
*12x2" wafers or | |||
*12x4" wafers or | |||
*4x6" wafers | |||
|- | |- | ||
| Pre-clean | | Pre-clean | ||
|RF Ar clean | |RF Ar clean | ||
|RF Ar clean | |RF Ar clean | ||
|RF Ar clean | |||
|- | |- | ||
| Layer thickness | | Layer thickness | ||
Revision as of 14:59, 1 March 2013
Feedback to this page: click here
Nickel deposition
Nickel can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.
| E-beam evaporation (Alcatel) | E-beam evaporation (Wordentec) | E-beam evaporation (PVD co-sputter/evaporation) | |
|---|---|---|---|
| Batch size |
|
|
|
| Pre-clean | RF Ar clean | RF Ar clean | RF Ar clean |
| Layer thickness | 10Å to 1µm | 10Å to 1 µm | |
| Deposition rate | 2Å/s to 15Å/s | 10Å/s to 15Å/s |