Specific Process Knowledge/Etch/AOE (Advanced Oxide Etch)/Silicon Nitride Etch using AOE: Difference between revisions
New page: {| border="2" cellspacing="2" cellpadding="3" !Parameter !SiN_etch |- |Coil Power [W] |700 |- |Platen Power [W] |100 |- |Platen temperature [<sup>o</sup>C] |0 |- |C<math>_4</math>F<math>_... |
No edit summary |
||
Line 1: | Line 1: | ||
Test of etch in silicon nitride (LPCVD). 105nm nitride had to be removed - it was removed after 1min and 40s with a very small over etch in Si. | |||
{| border="2" cellspacing="2" cellpadding="3" | {| border="2" cellspacing="2" cellpadding="3" | ||
!Parameter | !Parameter | ||
! | !1Nitride | ||
|- | |- | ||
|Coil Power [W] | |Coil Power [W] |
Revision as of 12:59, 3 January 2012
Test of etch in silicon nitride (LPCVD). 105nm nitride had to be removed - it was removed after 1min and 40s with a very small over etch in Si.
Parameter | 1Nitride |
---|---|
Coil Power [W] | 700 |
Platen Power [W] | 100 |
Platen temperature [oC] | 0 |
CF flow [sccm] | 5 |
He flow [sccm] | 174 |
H flow [sccm] | 4 |
Pressure [mTorr] | 4 |
Typical results | Resist mask |
---|---|
Silicon nitride (LPCVD) etch rate | ~60 nm/min |
Selectivity to photo resist [:1] | ? |
Etch rate in Si | ? |
Etch rate in SiO2 | ? |
Profile [o] | not tested |
Images | . |
Comments | . |