Specific Process Knowledge/Etch/Etching of Silicon Oxide/SiO2 etch using ASE: Difference between revisions
Jump to navigation
Jump to search
Line 10: | Line 10: | ||
The challenge was to develop a SiO2 etching recipe that can be used for samples on a carrier. Samples that cannot be clamped and cooled. The goal was to keep a good selectivity to the resist mask and get a vertical sidewall, without getting a lot of redeposition on the sidewalls. The testing regime was using both the coil power and the platen power with C4F8 chemistry. | The challenge was to develop a SiO2 etching recipe that can be used for samples on a carrier. Samples that cannot be clamped and cooled. The goal was to keep a good selectivity to the resist mask and get a vertical sidewall, without getting a lot of redeposition on the sidewalls. The testing regime was using both the coil power and the platen power with C4F8 chemistry. | ||
[[Image:ASE SiO2 image of development flow 01.jpg| | [[Image:ASE SiO2 image of development flow 01.jpg|100px|Take a look at the development flow and the results here: [[Media:ASE SiO2 etch on carrier ICP C4F8 H2 no He rev02.pdf]]. Zoom in to read and see the images: (Ctrl + "+")]] | ||
*Take a look at development flow and the results here: [[Media:ASE SiO2 etch on carrier ICP C4F8 H2 no He rev02.pdf]]. Zoom in to read and see the images: (Ctrl + "+") | *Take a look at development flow and the results here: [[Media:ASE SiO2 etch on carrier ICP C4F8 H2 no He rev02.pdf]]. Zoom in to read and see the images: (Ctrl + "+") |
Revision as of 13:15, 5 April 2018
Feedback to this page: click here
THIS PAGE IS UNDER CONSTRUCTION
Development work: SiO2 etch with resist mask, sample on carrier (Si carrier)
By Berit Herstrøm @danchip, January-Marts 2018
The challenge was to develop a SiO2 etching recipe that can be used for samples on a carrier. Samples that cannot be clamped and cooled. The goal was to keep a good selectivity to the resist mask and get a vertical sidewall, without getting a lot of redeposition on the sidewalls. The testing regime was using both the coil power and the platen power with C4F8 chemistry.
- Take a look at development flow and the results here: Media:ASE SiO2 etch on carrier ICP C4F8 H2 no He rev02.pdf. Zoom in to read and see the images: (Ctrl + "+")