Specific Process Knowledge/Lithography/EBeamLithography/RaithElphyManual: Difference between revisions
| Line 20: | Line 20: | ||
{| cellpadding="2" style="border: 2px solid darkgray;" align="right" | {| cellpadding="2" style="border: 2px solid darkgray;" align="right" | ||
! width=" | ! width="150px" | | ||
|- border="0" | |- border="0" | ||
| [[File:IMG_0239.jpg]] | | [[File:IMG_0239.jpg | 150px]] | ||
|- align="center" | |- align="center" | ||
| Chip holder to Raith Elphy E-beam writer system; the holder has three clamps to hold up to 3 chips and a Faraday's cup to measure beam current. | | Chip holder to Raith Elphy E-beam writer system; the holder has three clamps to hold up to 3 chips and a Faraday's cup to measure beam current. | ||
|} | |} | ||
Revision as of 19:41, 29 September 2015
Feedback to this page: click here
Purpose, location and technical specifications
The Raith Elphy system is a pattern generator built onto the LEO Scanning Electron Microscope (SEM) in cleanroom F-2. All users must therefore acquire license to use the SEM LEO before acquiring license to the Raith Elphy system.
Techical Specification
The system can be characterized as follows:
- Electron-beam scanning speeds, f, up to X MHz are available (which is maximum scan speed).
- The acceleration voltage is maximum 25 kV.
- The maximum field-size without stitching is X µm x Y µm.
- The machine has a chip holder that fits to 2 - 3 chips with sizes of approximately 1 x 1 cm2 each. A larger chip or wafer can also be mounted on a holder without a Faraday's cup.
Mounting of chips or wafers into chamber
- Ventilate the SEM chamber
- Mount your chips(s)
|
| Chip holder to Raith Elphy E-beam writer system; the holder has three clamps to hold up to 3 chips and a Faraday's cup to measure beam current. |