Specific Process Knowledge/Thin film deposition/Deposition of Nickel: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
! | ! | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Alcatel|Alcatel]]) | ||
! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Wordentec|Wordentec]]) | ! E-beam evaporation ([[Specific Process Knowledge/Thin film deposition/Wordentec|Wordentec]]) | ||
|- | |- | ||
| Line 12: | Line 11: | ||
*Up to 1x4" wafers | *Up to 1x4" wafers | ||
*smaller pieces | *smaller pieces | ||
| | | | ||
*24x2" wafers or | *24x2" wafers or | ||
| Line 22: | Line 18: | ||
| Pre-clean | | Pre-clean | ||
|RF Ar clean | |RF Ar clean | ||
|RF Ar clean | |RF Ar clean | ||
|- | |- | ||
| Layer thickness | | Layer thickness | ||
|10Å to 1µm | |10Å to 1µm | ||
|10Å to 1 µm | |10Å to 1 µm | ||
|- | |- | ||
| Deposition rate | | Deposition rate | ||
|2Å/s to 15Å/s | |2Å/s to 15Å/s | ||
|10Å/s to 15Å/s | |10Å/s to 15Å/s | ||
|- | |- | ||
|} | |} | ||
Revision as of 15:39, 15 August 2011
Nickel can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.
| E-beam evaporation (Alcatel) | E-beam evaporation (Wordentec) | |
|---|---|---|
| Batch size |
|
|
| Pre-clean | RF Ar clean | RF Ar clean |
| Layer thickness | 10Å to 1µm | 10Å to 1 µm |
| Deposition rate | 2Å/s to 15Å/s | 10Å/s to 15Å/s |