Specific Process Knowledge/Thin film deposition/Deposition of Aluminium/Thermal deposition of Al: Difference between revisions
No edit summary |
No edit summary |
||
Line 8: | Line 8: | ||
Aluminium can be thermally evaporated in [[Specific Process Knowledge/Thin_film_deposition/Wordentec|Wordentec]] . At DTU Danchip, we recommend to use a thin layer of thermally evaporated aluminum on top of e-beam resist, before the e-beam exposure. | |||
For deposition onto the unexposed e-beam resist, you need to use the thermal source. | |||
Revision as of 10:57, 16 October 2014
Feedback to this page: click here
Thermal evaporation of Aluminium
Aluminium can be thermally evaporated in Wordentec . At DTU Danchip, we recommend to use a thin layer of thermally evaporated aluminum on top of e-beam resist, before the e-beam exposure. For deposition onto the unexposed e-beam resist, you need to use the thermal source.
There is a general page concerning different methods of depositing Aluminium at Danchip.