Specific Process Knowledge/Etch/Etching of Platinum: Difference between revisions

From LabAdviser
Jump to navigation Jump to search
Line 14: Line 14:
<br clear="all" />
<br clear="all" />


==Comparison of Gold Etch Methods==
==Comparison of Platinum Etch Methods==


{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"  
{|border="1" cellspacing="1" cellpadding="3" style="text-align:left;"  
Line 22: Line 22:
|-style="background:silver; color:black"
|-style="background:silver; color:black"
!
!
![[Specific Process Knowledge/Etch/Wet Gold Etch|Au wet etch 1]]
![[Specific Process Knowledge/Etch/Wet Patinum Etch|Pt wet etch]]
![[Specific Process Knowledge/Etch/Wet Gold Etch|Au wet etch 2]]
![[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300|IBE (Ionfab300+)]]
![[Specific_Process_Knowledge/Etch/IBE&frasl;IBSD Ionfab 300|IBE (Ionfab300+)]]
|-
|-
Line 30: Line 29:
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!Generel description
!Generel description
|Wet etch of Au using Iodine based chemistry
|Wet etch of Pt
|Wet etch of Au using Aqua Regina
|Sputtering of Pt
|Sputtering of Au - pure physical etch
|-
|-


Line 41: Line 39:
*~100nm/min
*~100nm/min
|
|
*~?nm/min - fast etch
*~55nm/min (not tested yet)  
|
*~55nm/min (acceptance test)  
|-
|-


Line 49: Line 45:
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!Etch profile
!Etch profile
|
*Isotropic
|
|
*Isotropic
*Isotropic
Line 60: Line 54:
!Masking material
!Masking material
|
|
*Photoresist
*None (only used for stripping Pt)
|
*None (only used for stipping Au)
|
|
*Any material that is allowed in the chamber, photoresists included  
*Any material that is allowed in the chamber, photoresists included  
Line 72: Line 64:
!Substrate size
!Substrate size
|
|
*Any size and number that can go inside the beaker in use  
*Any size and number that can go inside the beaker in use
|
*Any size and number that can go inside the beaker in use
 
|
|
Smaller pieces glued to carrier wafer
Smaller pieces glued to carrier wafer
Line 88: Line 77:
!'''Allowed materials'''
!'''Allowed materials'''
|
|
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals  
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|
No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals
|
|
*Silicon  
*Silicon  

Revision as of 11:58, 8 April 2013

THIS PAGE IS UNDER CONSTRUCTIONUnder construction.png

Feedback to this page: click here

Etching of Platinum

Etching of Platinum can be done either by wet etch or by sputtering with ions.


Comparison of Platinum Etch Methods

Pt wet etch IBE (Ionfab300+)
Generel description Wet etch of Pt Sputtering of Pt
Etch rate range
  • ~100nm/min
  • ~55nm/min (not tested yet)
Etch profile
  • Isotropic
  • Anisotropic (angles sidewalls, typical around 70 dg)
Masking material
  • None (only used for stripping Pt)
  • Any material that is allowed in the chamber, photoresists included
Substrate size
  • Any size and number that can go inside the beaker in use

Smaller pieces glued to carrier wafer

  • #1 50mm wafer
  • #1 100mm wafer
  • #1 150mm wafer
  • #1 200mm wafer
Allowed materials

No restrictions cross contamination wise as long as you use the right beaker and make sure that they are safe to enter in the chemicals

  • Silicon
  • Silicon oxides
  • Silicon nitrides
  • Metals from the +list
  • Metals from the -list
  • Alloys from the above list
  • Stainless steel
  • Glass
  • III-V materials
  • Resists
  • Polymers
  • Capton tape
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/Etching_of_Platinum&oldid=9516"