Specific Process Knowledge/Lithography/UVExposure Dose: Difference between revisions

From LabAdviser
← Older edit
VisualWikitext
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,292 edits
Jehem (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, danchip
1,298 edits
Tag: New redirect
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Lithography/UVExposure_Dose click here]'''
#REDIRECT [[Specific Process Knowledge/Lithography/Resist#Exposure_dose]]
 
 
<!--
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Lithography/UVExposure_Dose click here]'''


=Exposure dose=
=Exposure dose=
[[Image:AZ spectral sensitivity.gif|300x300px|thumb|Spectral sensitivity of AZ resists represented as optical absorption. From http://www.microchemicals.com/]]
[[Image:AZ photoresists spectral sensitivity - remake v1.png|400x400px|thumb|Spectral sensitivity of AZ resists represented as optical absorption.]]


During exposure of the resist, the photoinitiator, or photo-active component, reacts with the exposure light, and starts the reaction that makes the resist develop in the developer. In a positive resist, it makes the resist become soluble in the developer. In a negative resist, usually assisted by thermal energy in the post-exposure bake, it makes the resist insoluble in the developer. The amount of light required to fully develop the resist in the development process, is the exposure dose.
During exposure of the resist, the photoinitiator, or photo-active component, reacts with the exposure light, and starts the reaction that makes the resist develop in the developer. In a positive resist, it makes the resist become soluble in the developer. In a negative resist, usually assisted by thermal energy in the post-exposure bake, it makes the resist insoluble in the developer. The amount of light required to fully develop the resist in the development process, is the exposure dose.
Line 35: Line 39:
|i-line notch filter
|i-line notch filter


365nm (FWHM = 7 nm)
365 nm (FWHM = 7 nm)
|8 mW/cm<sup>2</sup> @ 365 nm (Constant Intensity)
|8 mW/cm<sup>2</sup> @ 365 nm (Constant Intensity)
|
|
Line 49: Line 53:
|i-line notch filter
|i-line notch filter


365nm (FWHM = ? nm)
365 nm (FWHM = ? nm)
|The intensity is set by the user
|The intensity is set by the user


Line 80: Line 84:
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_01|Aligner: Maskless 01]]
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_01|Aligner: Maskless 01]]
|LED
|LED
|365nm
|365 nm
|-
|-


Line 87: Line 91:
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_02|Aligner: Maskless 02]]
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_02|Aligner: Maskless 02]]
|Laser diode array
|Laser diode array
|375nm
|375 nm


or
or


405nm
405 nm
|-
|-


Line 98: Line 102:
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_03|Aligner: Maskless 03]]
![[Specific_Process_Knowledge/Lithography/UVExposure#Aligner:_Maskless_03|Aligner: Maskless 03]]
|Laser diode array
|Laser diode array
|405nm
|405 nm
|-
|-


Line 105: Line 109:


==Calculating exposure time==
==Calculating exposure time==
In the maskless aligners, the dose is set as a process parameter in the job. In mask aligners, on the other hand, the parameter that is set is the exposure time, i.e. how long the shutter is open during the exposure.
In the maskless aligners, the dose is set directly as a process parameter in the job. In mask aligners, on the other hand, the parameter that is set is the exposure time, i.e. how long the shutter is open during the exposure.


The exposure dose, ''D'' [J/m<sup>2</sup>], is given by:
The exposure dose, ''D'' [J/m<sup>2</sup>], is given by:
Line 119: Line 123:
It is important to keep in mind that this exposure time is valid only for a specific combination of exposure source and optical sensor, as well as for a specific development process.
It is important to keep in mind that this exposure time is valid only for a specific combination of exposure source and optical sensor, as well as for a specific development process.


<!-- SECTION HIDDEN BY TARAN 20-03-2020
SECTION HIDDEN BY TARAN 20-03-2020


==Comparison: Relative exposure dose==
==Comparison: Relative exposure dose==
Line 170: Line 174:


<sup>1)</sup> Due to a difference in the sensitivity of the power meter used in calibration.
<sup>1)</sup> Due to a difference in the sensitivity of the power meter used in calibration.
-->


<br clear="all" />
<br clear="all" />
Line 259: Line 261:
|-style="background:silver; color:black"
|-style="background:silver; color:black"
|
|
!Date
!Thickness
!Thickness
!Dose
!Dose
Line 267: Line 270:
|-
|-
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!rowspan="2"|AZ 5214E
!rowspan="2"|AZ 5214E<br><span style="color:red">Old German version</span>
|Long ago
|1.5 µm
|1.5 µm
|72 mJ/cm<sup>2</sup>
|72 mJ/cm<sup>2</sup>
Line 273: Line 277:
|rowspan="2"|Positive process
|rowspan="2"|Positive process
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
|Long ago
|2.2 µm
|2.2 µm
|90 mJ/cm<sup>2</sup>
|90 mJ/cm<sup>2</sup>
Line 280: Line 285:
|-
|-
|-style="background:LightGrey; color:black"
|-style="background:LightGrey; color:black"
!rowspan="2"|AZ 5214E
!rowspan="2"|AZ 5214E Image Reversal<br><span style="color:red">Old German version</span>
|Long ago
|1.5 µm
|1.5 µm
|22? mJ/cm<sup>2</sup>
|22 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|Single puddle, 60 s
|rowspan="2"|Image reversal process.  
|rowspan="2"|Image reversal process.<br>Reversal bake: 120s at 110°C.<br>Flood exposure: 200 mJ/cm<sup>2</sup>
 
Reversal bake: 120s at 110°C.<br>Flood exposure after reversal bake: 195 mJ/cm<sup>2</sup>
|-style="background:LightGrey; color:black"
|-style="background:LightGrey; color:black"
|Long ago
|2.2 µm
|2.2 µm
|25 mJ/cm<sup>2</sup>
|25 mJ/cm<sup>2</sup>
Line 295: Line 300:
|-
|-
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!AZ 4562
!rowspan="3"|AZ MiR 701<br><span style="color:red">Old PFOA containing version</span>
|10 µm
|Long ago
|520-?? mJ/cm<sup>2</sup>
|Multiple puddle, 4 x 60 s
|Multiple exposure with 10 s pauses is recommended.
 
Process not yet established.
|-
 
|-
|-style="background:LightGrey; color:black"
!rowspan="3"|AZ MiR 701
|1.5 µm
|1.5 µm
|169 mJ/cm<sup>2</sup>
|169 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|Single puddle, 60 s
|rowspan="2"|PEB: 60 s at 110°C
|rowspan="2"|PEB: 60 s at 110°C
|-style="background:LightGrey; color:black"
|-style="background:WhiteSmoke; color:black"
|Long ago
|2 µm
|2 µm
|~200 mJ/cm<sup>2</sup>
|~200 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|Single puddle, 60 s
|-style="background:LightGrey; color:black"
|-style="background:WhiteSmoke; color:black"
|Long ago
|4 µm
|4 µm
|~280 mJ/cm<sup>2</sup>
|~280 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|Single puddle, 60 s
|rowspan="1"|PEB: 60 s at 110°C
|rowspan="1"|PEB: 60 s at 110°C<br>Process adopted from process logs
 
Process adopted from process logs.
|-
|-


|-
|-
|-style="background:WhiteSmoke; color:black"
|-style="background:LightGrey; color:black"
!AZ nLOF 2020
!AZ nLOF 2020
|Long ago
|1.5 µm
|1.5 µm
|104 mJ/cm<sup>2</sup>
|104 mJ/cm<sup>2</sup>
|Single puddle, 30 s
|Single puddle, 30 s
|PEB: 60 s at 110°C<br>Use 60 s development for lift-off
|-
|-
|-style="background:WhiteSmoke; color:black"
!AZ 5214E<br><span style="color:green">New Japanese version</span>
|2023-01-11<br>jehem
|1.5 µm
|70 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|
|-
|-
|-style="background:LightGrey; color:black"
!AZ 5214E Image Reversal<br><span style="color:green">New Japanese version</span>
|2023-01-11<br>jehem
|2.2 µm
|22 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|Image reversal process.<br>Reversal bake: 60s at 110°C.<br>Flood exposure: 500 mJ/cm<sup>2</sup>
|-
|-
|-style="background:WhiteSmoke; color:black"
!AZ 4562<br><span style="color:green">New Japanese version</span>
|2021-12-08<br>jehem
|10 µm
|550 mJ/cm<sup>2</sup>
|Multiple puddles, 5 x 60 s
|Priming: HMDS<BR>Rehydration after SB: 1 hour (may not be necessary)<br>Exposure: Multiple exposures with pauses, 5 x (10 s exposure + 10 s pause)<br>Degassing after exposure: 1 hour (may not be necessary)
|-
|-
|-style="background:LightGrey; color:black"
!AZ MiR 701<br><span style="color:green">New PFOA free version</span>
|2021-06-23<br>elkh
|1.5 µm
|~150 mJ/cm<sup>2</sup>
|Single puddle, 60 s
|PEB: 60 s at 110°C
|PEB: 60 s at 110°C
Use 60 s development for lift-off
|-
|-
|}
|}
<br clear="all" />
<br clear="all" />
Line 344: Line 381:
Aligner: Maskless 01 uses a 365nm LED source. The exposure dose needed seems to follow the dose needed to process the same substrate in [[Specific_Process_Knowledge/Lithography/UVExposure_Dose#Aligner:_MA6_-_2|Aligner: MA6-2]]. As doses get higher, there is a tendency for the dose needed in the Aligner: Maskless 01 to exceed the dose needed in Aligner: MA6-2.
Aligner: Maskless 01 uses a 365nm LED source. The exposure dose needed seems to follow the dose needed to process the same substrate in [[Specific_Process_Knowledge/Lithography/UVExposure_Dose#Aligner:_MA6_-_2|Aligner: MA6-2]]. As doses get higher, there is a tendency for the dose needed in the Aligner: Maskless 01 to exceed the dose needed in Aligner: MA6-2.


More information about the process parameters for exposure using Aligner: Maskless 01 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_01_processing#Process_Parameters|'''here''']]. The process log is also a good source of information.
More information about the process parameters for exposure using Aligner: Maskless 01 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_01_processing#Process_Parameters|'''here''']]. The [http://labmanager.dtu.dk/function.php?module=Processlog&view=editlog&machid=422 process log] is also a good source of information.


===Aligner: Maskless 02===
===Aligner: Maskless 02===


Aligner: Maskless 02 uses a 375nm or 405nm laser diode array source. Information about the process parameters for exposure using Aligner: Maskless 02 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_02_processing#Process_Parameters|'''here''']]. The process log is also a good source of information.
Aligner: Maskless 02 uses a 375nm or 405nm laser diode array source. Information about the process parameters for exposure using Aligner: Maskless 02 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_02_processing#Process_Parameters|'''here''']]. The [http://labmanager.dtu.dk/function.php?module=Processlog&view=editlog&machid=440 process log] is also a good source of information.


===Aligner: Maskless 03===
===Aligner: Maskless 03===


Aligner: Maskless 03 uses a 405nm laser diode array source. Information about the process parameters for exposure using Aligner: Maskless 03 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_03_processing#Process_Parameters|'''here''']]. The process log is also a good source of information.
Aligner: Maskless 03 uses a 405nm laser diode array source. Information about the process parameters for exposure using Aligner: Maskless 03 can be found [[Specific_Process_Knowledge/Lithography/Aligners/Aligner:_Maskless_03_processing#Process_Parameters|'''here''']]. The [http://labmanager.dtu.dk/function.php?module=Processlog&view=editlog&machid=464 process log] is also a good source of information.
 


=Exposure dose when using AZ 351B developer (NaOH)=
=Exposure dose when using AZ 351B developer (NaOH)=
Line 420: Line 456:
'''AZ 5214E image reversal'''
'''AZ 5214E image reversal'''
*1.5 µm resist on boron glass: around 49 mJ/cm<sup>2</sup> (supplied March 2013 by Morten Bo Lindholm Mikkelsen, DTU Nanotech).
*1.5 µm resist on boron glass: around 49 mJ/cm<sup>2</sup> (supplied March 2013 by Morten Bo Lindholm Mikkelsen, DTU Nanotech).
-->

Latest revision as of 10:47, 23 October 2023

Redirect to:

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/UVExposure_Dose&oldid=47994"