Specific Process Knowledge/Thin Film deposition/ALD/Al2O3 deposition using ALD: Difference between revisions

From LabAdviser
← Older edit
VisualWikitext
Pevo (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
2,009 edits
No edit summary
Pevo (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
2,009 edits
No edit summary
 
(18 intermediate revisions by 3 users not shown)
Line 1: Line 1:


=<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|200px]]=
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Thin_Film_deposition/ALD/Al2O3_deposition_using_ALD click here]'''


The ALD window for depostion of Al<sub>2</sub>O<sub>3</sub> ranges from 150 <sup>o</sup>C to 350 <sup>o</sup>C. XPS measurements shows that at temperatures below 150 <sup>o</sup>C the Al<sub>2</sub>O<sub>3</sub> will be contaminated by unreacted TMA molecules, and at temperatures above 350 <sup>o</sup>C the TMA decomposes.
''This page is written by DTU Nanolab internal''


The deposition rate for Al<sub>2</sub>O<sub>3</sub> depends on the temperature, see the graph below. 


{| border="1" cellspacing="1" cellpadding="2"
The ALD window for depostion of aluminium oxide (Al<sub>2</sub>O<sub>3</sub>) ranges from 150 <sup>o</sup>C to 300 <sup>o</sup>C. XPS measurements shows that at temperatures below 150 <sup>o</sup>C the Al<sub>2</sub>O<sub>3</sub> layer will be contaminated by unreacted TMA molecules, and at temperatures above 300 <sup>o</sup>C the TMA decomposes.  
!
 
[[Image:ALD window Al2O3 H2O.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 150 <sup>o</sup>C.]]
All results shown on this page have been obtained by depositing Al2O3 on new Si(100) wafers with native oxide using the "AL2O3" recipe.
|}




In the graphs below the Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles for deposition temperatures between 150 <sup>o</sup>C and 350 <sup>o</sup>C can be seen. From the equations the number of cycles required for a certain thickess can be calculated. The results have been obtained using the "AL2O3" recipe:
====Al<sub>2</sub>O<sub>3</sub> standard recipe====


<b>Recipe name</b>: AL2O3
<b>Recipe</b>: AL2O3


<b>Temperature</b>: 150 <sup>o</sup>C - 350 <sup>o</sup>C
<b>Temperature</b>: 150 <sup>o</sup>C - 350 <sup>o</sup>C
Line 39: Line 37:




{| border="1" cellspacing="1" cellpadding="2"
====Al<sub>2</sub>O<sub>3</sub> deposition rates====
!
[[Image:ALD Al2O3 grow rate 150C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 150 <sup>o</sup>C.]]
|}
 
 
{| border="1" cellspacing="1" cellpadding="2"
!
[[Image:ALD Al2O3 grow rate 200C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 200 <sup>o</sup>C.]]
|}


The deposition rate for Al<sub>2</sub>O<sub>3</sub> depends on the temperature, see the graph below. 


{| border="1" cellspacing="1" cellpadding="2"  
{| border="1" cellspacing="1" cellpadding="2"  
!
!
[[Image:ALD Al2O3 grow rate 250C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 250 <sup>o</sup>C.]]
[[Image:ALD window Al2O3 H2O.jpg|350x350px|thumb|center|Al<sub>2</sub>O<sub>3</sub> deposition rate as function of temperature.]]
|}
|}




{| border="1" cellspacing="1" cellpadding="2"
In the graphs below the Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles for deposition temperatures between 150 <sup>o</sup>C and 350 <sup>o</sup>C can be seen. The points have been fitted to a linear curve, and the slope of this curve shows the deposition rate. So from the equation the number of cycles required for a certain thickness of Al<sub>2</sub>O<sub>3</sub> to be deposited can be calculated.  
!
[[Image:ALD Al2O3 grow rate 300C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 300 <sup>o</sup>C.]]
|}


<gallery caption="Aluminium oxide thickness as function of number of cycles" widths="250px" heights="250px" perrow="5">
image:ALD Al2O3 grow rate 150C.jpg| Temperature 150 <sup>o</sup>C.
image:ALD Al2O3 grow rate 200C.jpg| Temperature 200 <sup>o</sup>C.
image:ALD Al2O3 grow rate 250C.jpg| Temperature 250 <sup>o</sup>C.
image:ALD Al2O3 grow rate 300C.jpg| Temperature 300 <sup>o</sup>C.
image:ALD Al2O3 grow rate 350C.jpg| Temperature 350 <sup>o</sup>C.
</gallery>


{| border="1" cellspacing="1" cellpadding="2"
Evgeniy Shkondin, DTU Nanolab, February-March 2014.
!
[[Image:ALD Al2O3 grow rate 350C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 350 <sup>o</sup>C.]]
|}
 
 
{| border="1" cellspacing="1" cellpadding="2"
!
[[Image:ALD Al2O3 grow rate 300C.jpg|300x300px|thumb|center|Al<sub>2</sub>O<sub>3</sub> thickness as function of number of cycles, temperature 300 <sup>o</sup>C.]]
|}
 
Evgeniy Shkondin, DTU Danchip, February-March 2014.

Latest revision as of 10:26, 19 June 2023

Feedback to this page: click here

This page is written by DTU Nanolab internal


The ALD window for depostion of aluminium oxide (Al2O3) ranges from 150 oC to 300 oC. XPS measurements shows that at temperatures below 150 oC the Al2O3 layer will be contaminated by unreacted TMA molecules, and at temperatures above 300 oC the TMA decomposes.

All results shown on this page have been obtained by depositing Al2O3 on new Si(100) wafers with native oxide using the "AL2O3" recipe.


Al2O3 standard recipe

Recipe: AL2O3

Temperature: 150 oC - 350 oC

TMA H2O
Nitrogen flow 150 sccm 200 sccm
Pulse time 0.1 s 0.1 s
Purge time 3.0 s 4.0 s


Al2O3 deposition rates

The deposition rate for Al2O3 depends on the temperature, see the graph below.

Al2O3 deposition rate as function of temperature.


In the graphs below the Al2O3 thickness as function of number of cycles for deposition temperatures between 150 oC and 350 oC can be seen. The points have been fitted to a linear curve, and the slope of this curve shows the deposition rate. So from the equation the number of cycles required for a certain thickness of Al2O3 to be deposited can be calculated.

  • Aluminium oxide thickness as function of number of cycles
  • Temperature 150 oC.
    Temperature 150 oC.
  • Temperature 200 oC.
    Temperature 200 oC.
  • Temperature 250 oC.
    Temperature 250 oC.
  • Temperature 300 oC.
    Temperature 300 oC.
  • Temperature 350 oC.
    Temperature 350 oC.

Evgeniy Shkondin, DTU Nanolab, February-March 2014.

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thin_Film_deposition/ALD/Al2O3_deposition_using_ALD&oldid=46605"