Specific Process Knowledge/Etch/Etching of Silicon Oxide/SiO2 etch using AOE/With CSAR resist mask: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Silicon_Oxide/SiO2_etch_using_AOE/With_CSAR_resist_mask click here]''' | '''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/Etching_of_Silicon_Oxide/SiO2_etch_using_AOE/With_CSAR_resist_mask click here]''' | ||
''Information given by Alberto Cagliani February 2015'' | ''Information on this page given by Alberto Cagliani February 2015'' | ||
Using the standard oxide recipe (SiO2_res) for 1 min the CSAR looked burned (test 2016-08-19 resist did not look burned after 1 min) and could not be removed by CSAR stripper (AR600-71). | Using the standard oxide recipe (SiO2_res) for 1 min the CSAR looked burned (test 2016-08-19 resist did not look burned after 1 min) and could not be removed by CSAR stripper (AR600-71). | ||
| Line 41: | Line 41: | ||
|- | |- | ||
|Etch rate of thermal oxide | |Etch rate of thermal oxide | ||
|'''~ | |'''~105 nm/min (<5% etch load)''' | ||
|- | |- | ||
|Selectivity to CSAR [:1] | |Selectivity to CSAR [:1] | ||
Latest revision as of 13:01, 3 February 2023
Feedback to this page: click here
Information on this page given by Alberto Cagliani February 2015
Using the standard oxide recipe (SiO2_res) for 1 min the CSAR looked burned (test 2016-08-19 resist did not look burned after 1 min) and could not be removed by CSAR stripper (AR600-71). Using the following settings the resist did not looked burned and could be removed by CSAR stripper:
| Parameter | Recipe name: |
|---|---|
| Coil Power [W] | 450 |
| Platen Power [W] | 80 |
| Platen temperature [oC] | 0 |
| He flow [sccm] | 174 |
| C4F8 flow [sccm] | 5 |
| H2 flow [sccm] | 4 |
| Pressure [mTorr] | 4 |
| Typical results | Negative Resist mask Nanolab result |
|---|---|
| Etch rate of thermal oxide | ~105 nm/min (<5% etch load) |
| Selectivity to CSAR [:1] | ~2 |
| Profile [o] | not measured |
| Images | none |
| Comments | CSAR did not burn and could be removed by AR600-71 |