Specific Process Knowledge/Etch/DRIE-Pegasus/StandardRecipes: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Feedback to this page: | '''Feedback to this page: | ||
[mailto: | [mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/Specific_Process_Knowledge/Etch/DRIE-Pegasus/StandardRecipes click here]''' | ||
<!--Checked for updates on | <!--Checked for updates on 30/7-2018 - ok/jmli --> | ||
<!--Checked for updates on 5/10-2020 - ok/jmli --> | |||
== Overview of the standard processes: Processes A, B, C, D and SOI == | == Overview of the standard processes: Processes A, B, C, D and SOI == | ||
<!--Page reviewed by jmli 2/2-2023 --> | |||
{{Template:Author-jmli1}} | |||
The instrument was accepted on the basis of the performance of 5 processes. Below is a general comparison - to find more detailed information, go the web page for each process | The instrument was accepted on the basis of the performance of 5 processes. Below is a general comparison - to find more detailed information, go the web page for each process | ||
Latest revision as of 16:39, 2 February 2023
Feedback to this page: click here
Overview of the standard processes: Processes A, B, C, D and SOI
Unless otherwise stated, all content on this page was created by Jonas Michael-Lindhard, DTU Nanolab
The instrument was accepted on the basis of the performance of 5 processes. Below is a general comparison - to find more detailed information, go the web page for each process
| Process name | Type | Purpose | Conditions during original runs | Best usage | |||
|---|---|---|---|---|---|---|---|
| Feature | Mask material | Etch load | Comments | ||||
| Process A | Bosch | Fast etch | 80 µm trench | Photo resist | 12-13 % on 6" wafer | ||
| Process B | Bosch | Fast etch | 30 µm diameter via | Photo resist | 12-13 % on 6" wafer | ||
| Process C | Continuous | Very slow etch | 50 nm posts | Aluminum | 99.9 % on 4" wafer | ||
| Process D | Bosch | Smooth sidewall etch | 10 µm trench | Photo resist | 50 % on 6" wafer | ||