Specific Process Knowledge/Thin film deposition/DiamondCVD: Difference between revisions
m (→Equipment performance and process related parameters: added info) |
|||
Line 4: | Line 4: | ||
[[File:diamond cvd seki.png|upright=2|alt=On the left is a tall instrument rack with various panels and control screens. It says "Seki technotron" on top. There are indicator lamps and an EMO button. On the right is the processing chamber which is relatively small, it's a cylindrical vacuum chamber with a small window facing the viewer. It's connected to gas lines and an exhaust system on top. There's a large panel covering the lower part of the instrument.|right|thumb|The SEKI diamond CVD in cleanroom B-1]] | [[File:diamond cvd seki.png|upright=2|alt=On the left is a tall instrument rack with various panels and control screens. It says "Seki technotron" on top. There are indicator lamps and an EMO button. On the right is the processing chamber which is relatively small, it's a cylindrical vacuum chamber with a small window facing the viewer. It's connected to gas lines and an exhaust system on top. There's a large panel covering the lower part of the instrument.|right|thumb|The SEKI diamond CVD in cleanroom B-1]] | ||
The SEKI AX5250S is a Microwave Plasma Chemical Vapor Deposition (MPCVD) system for growth of diamond thin films. The system is fitted with | The SEKI AX5250S is a Microwave Plasma Chemical Vapor Deposition (MPCVD) system for growth of diamond thin films. The system is fitted with hydrogen, methane, and oxygen for diamond growth. | ||
Depending on the starting material both polycrystalline and single crystalline diamond can be grown. Diamond has a lattice constant of 3.567 Å, which is not easily matched to other materials, and therefore in general diamond growth must be seeded by diamond as nucleation sites. | Depending on the starting material both polycrystalline and single crystalline diamond can be grown. Diamond has a lattice constant of 3.567 Å, which is not easily matched to other materials, and therefore in general diamond growth must be seeded by diamond as nucleation sites. |
Revision as of 13:29, 20 October 2020
Feedback to this page: click here
SEKI Diamond CVD
The SEKI AX5250S is a Microwave Plasma Chemical Vapor Deposition (MPCVD) system for growth of diamond thin films. The system is fitted with hydrogen, methane, and oxygen for diamond growth.
Depending on the starting material both polycrystalline and single crystalline diamond can be grown. Diamond has a lattice constant of 3.567 Å, which is not easily matched to other materials, and therefore in general diamond growth must be seeded by diamond as nucleation sites.
For single crystalline diamond this means that diamond layers in most cases must be grown on top of single crystal diamonds. For polycrystalline diamond, almost any material will do as long as it can withstand a growth temperature of 800 °C. It just needs to be seeded with nano diamonds. The seeding can happen by immersion into solution, by polishing, or by spray coating with nano diamonds.
The user manual, APV, technical information, and contact information can be found in LabManager:
More details
Equipment | SEKI AX5250S | |
---|---|---|
Purpose | Diamond growth |
|
Parameters |
H2 |
1000 sccm |
CH4 |
50 sccm | |
O2 |
20 sccm | |
Operating pressure |
>200 Torr (usually about 125 Torr for diamond growth) | |
Power |
5000 W | |
Temperature |
700-900 °C | |
Process | Growth rate |
About 8 Å/s (3 μm/hr) |
Max thickness |
About 100 μm | |
Uniformity |
OK up to 50 mm diameter | |
Substrates | Substrate size |
up to 100 mm wafers, 50 mm preferred |
Allowed materials |
Ask |