LabAdviser/Technology Research/Fabrication of Hyperbolic Metamaterials using Atomic Layer Deposition/AZO gratings: Difference between revisions
< LabAdviser | Technology Research | Fabrication of Hyperbolic Metamaterials using Atomic Layer Deposition
Jump to navigation
Jump to search
(Created page with "====Procces flow description==== All samples were prepared and characterized in a class 100 cleanroom. Si (100) wafers of 150 mm were used as a substrate. The main steps in t...") |
|||
| Line 4: | Line 4: | ||
<gallery caption="" widths=" | <gallery caption="" widths="5000px" heights="600px" perrow="1"> | ||
image:AZO_trench_fab.jpg| Scheme of fabrication flow. High aspect ratio Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> nanogratings. | image:AZO_trench_fab.jpg| Scheme of fabrication flow. High aspect ratio Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> nanogratings. | ||
</gallery> | </gallery> | ||
Revision as of 13:49, 15 March 2017
Procces flow description
All samples were prepared and characterized in a class 100 cleanroom. Si (100) wafers of 150 mm were used as a substrate. The main steps in the gratings manufacturing are shown in a figure below. First, the silicon trenches were realized by deep reactive ion etching (DRIE). Then, the trenches were ALD coated. After the selective removal of the top parts, the silicon core between ALD coatings was etched away during the last step. The final structure represents the highly anisotropic vertical grating. Each fabrication step was carefully evaluated using cross-sectional scanning electron microscopy (SEM) imaging.
Scheme of fabrication flow. High aspect ratio Al2O3 and TiO2 nanogratings.
