Specific Process Knowledge/Thermal Process

Feedback to this page: click here

Choose a process type

• Oxidation - Grow a thermal oxide on silicon
• Annealing
• Doping with Boron
• Doping with Phosphorus

Choose an equipment to use

• Boron Drive-in + Predep furnace (A1) - For oxidation and annealing of Si wafers, and for boron pre-deposition (doping) and for drive-in afterwards
• Gate Oxide furnace (A2) - For gate oxide growing on new wafers
• Phosphorus Drive-in furnace (A3) - For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep
• Phosphorus Predep furnace (A4) - For pre-deposition (doping) of phosphorus on Si wafers
• Anneal-oxide furnace(C1) - For oxidation and annealing of 100 mm and 150 mm wafers
• III-V oxidation furnace(C2) - For oxidation of Al_xGaAs layers.
• Anneal-bond furnace (C3) - For oxidation and annealing of bonded wafers
• Aluminium Anneal furnace (C4) - For annealing of wafers containing aluminium, Al₂O₃ and TiO₂
• Noble furnace - For annealing and oxidation of non-clean wafers
• APOX furnace - For growing of very thick oxide layers - (Decommissioned)
• Jipelec RTP - For rapid thermal annealing of III-V materials and Si based materials
• BCB Curing oven - For resist curing and metal alloying
• Furnace: Multipurpose annealing - For annealing, oxidation and resist pyrolysis
• Resist Pyrolysis furnace - For pyrolysis of different resist layers
• III-V Oven (D4) - For oxidation of Al_xGaAs layers. - (Decommissioned)