Specific Process Knowledge/Thermal Process
Jump to navigation
Jump to search
Feedback to this page: click here
Choose a process type
- Oxidation - Grow a thermal oxide on silicon
- Annealing
- Dope with Boron
- Dope with Phosphorus
Choose an equipment to use
- Boron Drive-in + Predep furnace (A1) - For oxidation and annealing of Si wafers, and for boron pre-deposition (doping) and for drive-in afterwards
- Gate Oxide furnace (A2) - For gate oxide growing on new wafers
- Phosphorus Drive-in furnace (A3) - For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep
- Phosphorus Predep furnace (A4) - For pre-deposition (doping) of phosphorus on Si wafers
- Anneal-oxide furnace(C1) - For oxidation and annealing of 100 mm and 150 mm wafers
- Anneal-bond furnace (C3) - For oxidation and annealing of bonded wafers
- Aluminium Anneal furnace (C4) - For oxidation and annealing of wafers containing aluminium
- Noble furnace - For annealing and oxidation of non-clean wafers
- APOX furnace - For growing of very thick oxide layers
- Jipelec RTP - For rapid thermal annealing of III-V materials and Si based materials
- BCB Curing oven - For resist curing and metal alloying
- Furnace: Multipurpose annealing - For annealing, oxidation and resist pyrolysis
- Resist Pyrolysis furnace - For pyrolysis of different resist layers
- III-V Oven (D4) - For oxidation of AlxGaAs layers.