LabAdviser:About - Revision history

Reet: /* About LabAdviser */

2025-09-17T09:08:38Z

About LabAdviser

← Older revision		Revision as of 11:08, 17 September 2025
Line 14:		Line 14:

	=About LabAdviser=		=About LabAdviser=
	LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main ~~puprose~~ of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.		LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main purpose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.

	LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.

Mmat: /* About LabAdviser */

2025-06-20T13:22:57Z

About LabAdviser

← Older revision		Revision as of 15:22, 20 June 2025
Line 14:		Line 14:

	=About LabAdviser=		=About LabAdviser=
	LabAdviser is a Wiki for users of ~~DTU Nanolab~~ facilities created with the main puprose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.		LabAdviser is a Wiki owned by DTU Nanolab for users of our facilities. It was created with the main puprose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.

	LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.

Mmat at 13:20, 20 June 2025

2025-06-20T13:20:51Z

@@ Line 1: / Line 1: @@
 LabAdviser is a Wiki for users of DTU Nanolab facilities created with the main puprose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.
-LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.
+LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser.
 If you are in doubt or if you have any questions, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].
 For LabAdviser-related comments or questions, please write to [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk].

Mmat at 08:50, 19 June 2025

2025-06-19T08:50:11Z

← Older revision		Revision as of 10:50, 19 June 2025
Line 3:		Line 3:
	LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.

	If you are in doubt or if you have any ~~question or comments~~, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].		If you are in doubt or if you have any questions, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].
			For LabAdviser-related comments or questions, please write to [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk].

Mmat at 08:49, 19 June 2025

2025-06-19T08:49:10Z

← Older revision		Revision as of 10:49, 19 June 2025
Line 3:		Line 3:
	LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.

	~~All content on LabAdviser, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.~~		If you are in doubt or if you have any question or comments, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].

	If in doubt, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].

Mmat at 08:47, 19 June 2025

2025-06-19T08:47:38Z

← Older revision		Revision as of 10:47, 19 June 2025
Line 3:		Line 3:
	LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.

	~~Please note that~~ LabAdviser ~~is not a replacement for direct communication with~~ DTU Nanolab staff~~. We make every effort to provide reliable information but we provide no warranty as to the accuracy~~, ~~reliability or completeness of the information found in LabAdviser. We strongly recommend reviewing the information on LabAdviser as preparation before reaching out to staff members~~.		All content on LabAdviser, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.

	If in doubt, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].		If in doubt, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].

Mmat at 14:14, 18 June 2025

2025-06-18T14:14:09Z

← Older revision		Revision as of 16:14, 18 June 2025
Line 1:		Line 1:
	~~The purpose of~~ LabAdviser is the sharing of knowledge ~~for scientific and educational use~~. ~~Most of the material is specific for the instruments that are~~ available in ~~our laboratories. We also want to invite students from all over~~ the ~~world to use it to learn about state-of-~~the~~-art nanofabrication and characterization~~.		LabAdviser is a Wiki for users of DTU Nanolab facilities created with the main puprose of sharing knowledge. It contains information about available equipment and fabrication processes in the cleanroom facilities in 346/347 and the characterisation equipment in building 307/314.

	~~DTU Nanolab makes every effort~~ to provide ~~reliable information~~, ~~but provides no warranty as~~ to ~~the accuracy~~, ~~reliability~~ or ~~completeness of the information found in this Wiki~~.		LabAdviser is designed to help you identify the right equipment and provide a solid starting point for your cleanroom processes or further optimization to meet specific requirements. However, due to ongoing development of tools and processes, some information may be incomplete or not up-to-date.

	~~In our laboratories, many experiments are being done and we want to support~~ that ~~the knowledge and experience acquired through these become accessible to current and future users. Sharing knowledge~~ is ~~the key~~ for ~~further development and all our users are encouraged~~ to ~~contribute. For~~ the ~~safety~~ of the ~~laboratory, however, we cannot allow~~ LabAdviser to ~~have an open-for-all-input structure like Wikipedia~~.		Please note that LabAdviser is not a replacement for direct communication with DTU Nanolab staff. We make every effort to provide reliable information but we provide no warranty as to the accuracy, reliability or completeness of the information found in LabAdviser. We strongly recommend reviewing the information on LabAdviser as preparation before reaching out to staff members.

	We are~~, however, happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or by writing~~ to [mailto:~~labadviser~~@nanolab.dtu.dk ~~labadviser~~@nanolab.dtu.dk]. ~~We fit the materials you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.~~		If in doubt, you are always welcome to contact us via [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk].

	~~<!-- DUPLICATE STATEMENT - BAD FOR MAINTENANCE~~
	~~==Copyright==~~
	All materials in LabAdviser have been cleared with the rights holders. For permission to share or reuse content from this site you need to ask permission from the relevant rights holder. I case the rights holder is DTU Nanolab, you can send a request for permission to labadviser@nanolab.dtu.dk.
	~~!-->~~

Mmat at 17:52, 10 June 2025

2025-06-10T17:52:56Z

← Older revision		Revision as of 19:52, 10 June 2025
Line 1:		Line 1:
	The purpose of LabAdviser is the sharing of knowledge for scientific and educational use. Most of the material is specific for the instruments that are available in our laboratories ~~and the main purpose with LabAdviser is to share knowledge among our users and with the micro-/nanofabrication community~~. We also want to invite students from all over the world to use it to learn about state-of-the-art nanofabrication and characterization.		The purpose of LabAdviser is the sharing of knowledge for scientific and educational use. Most of the material is specific for the instruments that are available in our laboratories. We also want to invite students from all over the world to use it to learn about state-of-the-art nanofabrication and characterization.

	DTU Nanolab makes every effort to provide reliable information, but ~~DTU Nanolab~~ provides no warranty as to the accuracy, reliability or completeness of the information found in this ~~wiki~~.		DTU Nanolab makes every effort to provide reliable information, but provides no warranty as to the accuracy, reliability or completeness of the information found in this Wiki.

	In our laboratories, many experiments are being done and we want to support that the knowledge and experience acquired through these become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. For the safety of the laboratory, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia.		In our laboratories, many experiments are being done and we want to support that the knowledge and experience acquired through these become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. For the safety of the laboratory, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia.

Mmat at 17:33, 10 June 2025

2025-06-10T17:33:54Z

← Older revision		Revision as of 19:33, 10 June 2025
Line 5:		Line 5:
	In our laboratories, many experiments are being done and we want to support that the knowledge and experience acquired through these become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. For the safety of the laboratory, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia.		In our laboratories, many experiments are being done and we want to support that the knowledge and experience acquired through these become accessible to current and future users. Sharing knowledge is the key for further development and all our users are encouraged to contribute. For the safety of the laboratory, however, we cannot allow LabAdviser to have an open-for-all-input structure like Wikipedia.

	We are, however, happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or by writing to labadviser@nanolab.dtu.dk. We fit the materials you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.		We are, however, happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or by writing to [mailto:labadviser@nanolab.dtu.dk labadviser@nanolab.dtu.dk]. We fit the materials you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.

	<!-- DUPLICATE STATEMENT - BAD FOR MAINTENANCE		<!-- DUPLICATE STATEMENT - BAD FOR MAINTENANCE

Mmat at 11:55, 7 May 2025

2025-05-07T11:55:39Z

← Older revision		Revision as of 13:55, 7 May 2025
Line 7:		Line 7:
	We are, however, happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or by writing to labadviser@nanolab.dtu.dk. We fit the materials you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.		We are, however, happy to receive contributions to LabAdviser from our users. We will decide whether it is relevant to add to this site. This can be done through a relevant employee or by writing to labadviser@nanolab.dtu.dk. We fit the materials you send us into the wiki in a way that you can agree upon and so it is in agreement with our experience and with general rules in the DTU Nanolab laboratory facilities.

			<!-- DUPLICATE STATEMENT - BAD FOR MAINTENANCE
	==Copyright==		==Copyright==
	All materials in LabAdviser have been cleared with the rights holders. For permission to share or reuse content from this site you need to ask permission from the relevant rights holder. I case the rights holder is DTU Nanolab, you can send a request for permission to labadviser@nanolab.dtu.dk.		All materials in LabAdviser have been cleared with the rights holders. For permission to share or reuse content from this site you need to ask permission from the relevant rights holder. I case the rights holder is DTU Nanolab, you can send a request for permission to labadviser@nanolab.dtu.dk.
			!-->