LabAdviser

From LabAdviser
Revision as of 11:01, 13 August 2019 by Bghe (Talk | contribs)

Jump to: navigation, search
Front page image 20160122.jpg

LabAdviser is a wiki that contains information about

  • equipment at DTU Nanolab that covers micro and nano fabrication in the cleanroom facility in building 346 and surroundings (in building 346 and 347) and characterization equipment, primarily electron microscopy, at building 314 and 307.
  • fabrication steps in micro and nano fabrication that takes place at the cleanroom fabrication facility and surroundings and
  • electron microscopy methods that takes place at building 314/307.

An overview of the equipment in these facilities can be found and some fabrication process flows and singles fabrication steps are described. In general LabAdviser is meant to advise you to the right equipment and to advise you to a good starting point for your micro and nano fabrication steps as for your electron microscopy work. This should not be replacing communication with the staff of the facilities but we recommend it as a good starting point before contacting the staff. To enter LabAdviser you need to log in with your DTU login. LabAdviser is only editable for the staff of the facilities. If you need further information about certain machinery or processes, please contact the relevant staff. Any feedback or input you might have to LabAdviser is welcome and can be given by mail to the LabAdviser mailbox: labadviser@nanolab.dtu.dk


News in LabAdviser:


Contents




Overview of micro and nano fabrication steps - a guide to where you can find fabrication information in LabAdviser:

- - -
Clean your sampleJehanClean.png Dry your sample JehanDry.png Create a thin film on your sample Jehanfilm.png Dope your sample JehanDope.png
Thermal treatment of your sample JehanThermal.png Make a mask on your sampleJehanmask.png Transfer pattern to your sample JehanTransfer.png Define your structure directly Jehandefine.jpg
Bond your samples together JehanBond.png Characterize your sample JehanCharacterize.png Pack your sample JehanPack.png Process flow examples Processflow b.png


Contact Information for the DTU Nanolab fabrication part

In order to get the quickest response to training requests, process approvals, questions etc. please use the following mailboxes to DTU Nanolab - Fabrication (formerly known as Danchip).

Mailbox link Concerning
LabAdviser Mailbox labadviser@nanolab.dtu.dk Any questions or feedback to LabAdviser.
Process flow review process_flow@nanolab.dtu.dk (should work again) More about process flow review here
Training on equipment training@nanolab.dtu.dk It is our goal to answer your request regarding process flow reviews and training within 2 workdays.
E-beam training e-beam@nanolab.dtu.dk
e-beamload@nanolab.dtu.dk
To request training on JEOL JBX-9500FSZ or Raith ELPHY e-beam writer.
Authorization to run JEOL JBX-9500FSZ requires at least 4 training sessions. Before you request for training on this machine, study this page and have all files ready: Getting started.
Mask order/review: Photomasks has to be ordered at Compugraphics in Procure. You can read more about the procedure for mask ordering here. It requires a specification file like this: (example spec file) and a design file (gds or cif format).

Mask Review

mask@nanolab.dtu.dk (Subject: Mask Review) Note: You have to order masks at Compugraphics via Procure.

Nanolab can offer a check of the mask design and specifications. You can read more about mask design here.

Metal wishes . .

Lesker:

metal@nanolab.dtu.dk (Subject: Lesker Metal Wishes). - See current and future materials here: Lesker status log

Temescal/Wordentec/Physimeca:

metal@nanolab.dtu.dk (Subject:PVD Metal Wishes) .
Tool change toolchange@nanolab.dtu.dk Laser: change of optics and
Polymer Injection Molding machine: change mold-tool
Commercial offers etc. sales@nanolab.dtu.dk mostly companies nanolabexternal customers
Gas-related questions DCH-Gas@nanolab.dtu.dk issues (information regarding ordering, delivery, changing etc. Mostly for internal Nanolab use
All other inquiries danchipsupport@nanolab.dtu.dk ... or if you are in doubt


DTU Nanolab Fabrication Cleanroom Naming and Phone Numbers


Cleanroom naming 2017.jpg


Room number Where in the room Phone number
A-1 At III-V RIE 55 804
Ax2 At the Lesker 55 815
A-5 In the corner near the furnace/plasma asher 55 803
B-1 In the corridor 55 806
C-1 At the corridor 55 808
D-1 The entrance room 55 703
D-3 At the KOH 55 940
E-1 By the e-beam computers 55 943
E-5 By Inclined UV-lamp 55 946
E-6 Furnace 6" 55 948
F-1 III-V growth 55 949
F-2 Next to Dektak-XTA 55 941
F-3 DUV Stepper 55 947
901 Injection molder room in the basement 55 812


DTU Nanolab building 314 and Phone Numbers


CEN building.jpg



Room number Description Phone number
314-011 QFEG 200 Cryo ESEM 56 406
314-014 Tecnai T20 56 407
314-032 Prep room No phone
314-034 AFEG 250 ESEM 56 414
314-037 Titan ETEM 56 408
314-040 Prep room (Bio) 56 413
314-042 Titan ATEM 56 409
314-060 Nova NanoSEM 600 56 412
314-061 Helios Nanolab 56 411


Personal tools
Namespaces

Variants
Actions
Navigation
Characterization facility (CEN)
Micro/Nano Fabrication
contact
extras
Toolbox