Specific Process Knowledge/Characterization/XRD/XRD SmartLab/Instrumental broading in GiXRD

From LabAdviser
Revision as of 13:12, 9 November 2023 by Eves (talk | contribs) (Created page with "This page describes values of Instrumental broadening in GiXRD measurements, and can be used as a reference for peak broadening in 2θ - scans. Most four common slit configuration cases are chosen. The instrumental broadening has been measured by using standard Si powder sample. Scherrer formula: <math>D=\frac{K\cdot\lambda}{\beta_{sample}\cdot cos\theta}</math> where: K is Scherrer constant (typically close to unity K=0.9-1)<br> λ is a wavelength of X-ray radiatio...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page describes values of Instrumental broadening in GiXRD measurements, and can be used as a reference for peak broadening in 2θ - scans. Most four common slit configuration cases are chosen. The instrumental broadening has been measured by using standard Si powder sample.

Scherrer formula:

where: K is Scherrer constant (typically close to unity K=0.9-1)
λ is a wavelength of X-ray radiation (λ Cu-Kα1 = 1.540562 Å, and in case both Cu-Kα1 and Cu-Kα2 are present λ Cu-Kα1,2 = 1.541871 Å)
θ is Bragg angle
βsample is a peak broadening. The technical point should be noted that intergal breadth and/or FWHM have to be inserted in radians.


in the case where the peaks obey Lorentzian (or Cauchy) distribution profile.

in the case of Gaussian distribution profile.

Experimental results implied crystallite size to cause a Cauchy-type broadening while strain broadening was associated with a Gauss profile. Real measurement contains contributions of both Lorentzian (Cauchy) and Gaussian distributions.


Full scans

case1

IS=0.5 mm and ω=2°


Peak number 2θ (°) FWHM (°) FWHM (rad) Integral breadth (°) Integral breadth (rad)
1 28.4077 0.2923 0.0051 0.3232 0.0056
2 47.2895 0.3109 0.0054 0.3395 0.0059
3 56.1274 0.3004 0.0052 0.3368 0.0059
4 69.1426 0.3082 0.0054 0.3325 0.0058
5 76.3659 0.2585 0.0045 0.2936 0.0051
6 88.0122 0.3174 0.0055 0.3609 0.0063
7 94.9581 0.3126 0.0055 0.3434 0.0060
8 106.7351 0.3317 0.0058 0.3637 0.0063

case2

IS=0.5 mm and ω=1°


Peak number 2θ (°) FWHM (°) FWHM (rad) Integral breadth (°) Integral breadth (rad)
1 28.4185 0.2961 0.0052 0.3246 0.0057
2 47.2935 0.2961 0.0052 0.3214 0.0056
3 56.1085 0.2881 0.0050 0.3206 0.0056
4 69.1297 0.3009 0.0053 0.3203 0.0056
5 76.3485 0.3110 0.0054 0.3525 0.0062
6 88.0310 0.2972 0.0052 0.3234 0.0056
7 94.9806 0.2872 0.0050 0.3114 0.0054
8 106.7100 0.2838 0.0050 0.3024 0.0053

case3

IS=1 mm and ω=2°


Peak number 2θ (°) FWHM (°) FWHM (rad) Integral breadth (°) Integral breadth (rad)
1 28.3469 0.3041 0.0053 0.3237 0.0056
2 47.2945 0.3009 0.0053 0.3242 0.0057
3 56.1208 0.3064 0.0053 0.3322 0.0058
4 69.1388 0.3363 0.0059 0.3598 0.0063
5 76.3682 0.2689 0.0047 0.3100 0.0054
6 88.0168 0.3443 0.0060 0.3811 0.0067
7 94.9673 0.3018 0.0053 0.3289 0.0057
8 106.7248 0.3344 0.0058 0.3655 0.0064

case4

IS=1 mm and ω=1°


Peak number 2θ (°) FWHM (°) FWHM (rad) Integral breadth (°) Integral breadth (rad)
1 28.4186 0.2981 0.0052 0.3187 0.0056
2 47.2990 0.2998 0.0052 0.3192 0.0056
3 56.0990 0.2991 0.0052 0.3418 0.0060
4 69.1210 0.2992 0.0052 0.3318 0.0058
5 76.3549 0.3070 0.0054 0.3386 0.0059
6 88.0328 0.3053 0.0053 0.3437 0.0060
7 94.9712 0.2838 0.0050 0.3127 0.0055
8 106.7197 0.2799 0.0049 0.2980 0.0052