LabAdviser/314/Preparation 314-307/Others
Feedback to this page: click here
Sonicators
Ultrasonic Branson 2510
VWR Ultrasonic Cleaner
Sonic Dismembrator
For further information on the machine usage contact: mktracy@dtu.dk.
Hot plates
Nuova hot plate
Hot plate Prep Room1
Plasma cleaner & Pumping Station
Fischione Plasma Cleaner model 1020
The Plasma Cleaner automatically and quickly removes organic contamination (hydrocarbon) from electron microscopy specimens and specimen holders. A low energy, reactive gas plasma cleans without changing the specimen’s elemental composition or structural characteristics. The Plasma Cleaner features easy-to-use front panel controls and an oil-free vacuum system for optimal processing.
.
Pumping Cube for single TEM specimen holder
This pumping cube is mainly used to check vacuum tightness of home made TEM holders. It is running a turbo pump, which can evacuate the chamber down to about 10-7 mbar. The pressure is measured by a wide-range gauge and recorded in a Labview program.
Gatan Turbo Pumping Station model 655
Capacity: 4 specimen holders. The turbo pumping station is a completely self-contained, compact, benchtop pumping station designed to regenerate the sorb material in cooling and cryo-transfer holder dewars and for vacuum storage of transmission electron microscope (TEM) holders or samples.
REMEMBER: When removing a holder, all other holder tubes are vented as well. Check, if one of the cryo-holder dewars is connected for pumping and running a pumping cycle (zeolite cycle). If this is the case, don't remove a holder. Get in contact with the cryo-holder user. There should be a note at the pumping station. When the zeolite cycle is finished, close the valves to the dewar before removing a holder.
Vacuum Pick-Up System
